American Standard 2902.028WC dimensions Savona Corner Whirlpool, High Gloss, Revised 2/08

SAVONA CORNER™ WHIRLPOOL

HIGH GLOSS

1492mm-3/4) (58

PROVIDE ACCESS	1067 mm
TO PUMP FOR
	(42)
SERVICING ON ALL

INSTALLATIONS

588mm-1/2)
1	(62

SAFE-T-HEATER

REMOVABLE BLANK

	ON/OFF	1765 mm
	SWITCH
102mm		(69-1/2)
(4)

RECOMMENDED FITTING LOCATION

64 X 330mm (2-1/2 X 13)

1067 mm

(42)

	203mm
	(8)
OUTLINE OF	C/L
CUTOUT
	1-1/2 O.D. DRAIN

1048mm	OUTLET
(41-1/4)

2096mm (82-1/2)

CUTOUT

IN FLOOR

FOR

DRAIN

914mm

(36)

PUMP

	51 mm	C/L OF
(2)		OVERFLOW

LEVELING

STRINGER

NOT FOR

SUPPORT

102mm

(4)

572 mm

(22-1/2)

521 mm

(20-1/2)

INTEGRAL	44 mm		ROUGH
	(1-3/4)
FEET		89 mm	FLOOR
		(3-1/2)

1-1/2 O.D. TAILPIECE	1-1/2 N.P.T.M.
	THREADS

NOTES:

GENERAL SPECIFICATIONS FOR 2902 WHIRLPOOL

INSTALLED SIZE		82-1/2 x 69-1/2 x 22-1/2 In.(2096 x 1765 x 572mm)
WEIGHT				144 Lbs. (65 Kg.)
WEIGHT w/WATER				803 Lbs. (361 Kg.)
GAL. TO OVERFLOW				79 Gal. (299 L)
WHIRLPOOL MIN. OPERATING VOL.				73 Gal. (277 L)
BATHING WELL AT SUMP				38 x 30 In. (965 x 762mm)
BATHING WELL AT RIM			58 x 55 In. (1473 x 1397mm)
WATER DEPTH TO OVERFLOW				15-3/4 In. (400mm)
FLOOR LOADING			33 Lbs./Sq.Ft. (165 Kgs./Sq.m)
(PROJECTED AREA)
PTS.			41.7
CUBE (FT3)					76.8
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM II PUMP				2.1 HP, 15.6 AMPS, 120V.

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS.

OPTIONAL TILING BEAD KIT AVAILABLE.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

▲CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

●IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF (152mm) 6 ABOVE ROUGH FLOOR.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certified. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

	H34
© 2008 AS America Inc.		Revised 2/08