American Standard 2908.178, 2908.020 installation instructions Installation Instructions

HIGH GLOSS ACRYLIC

FITTINGS NOT INCLUDED

INSTALLATION INSTRUCTIONS

THANK YOU...for selecting an American Standard . . . the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. All you need to finish the installation are your selected fittings. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

Protect all finished surfaces of the bath during construction and installation using a drop cloth. If packaging foam is removed for inspection purposes, save for foot installation procedure.

Fittings (bath filler, drain, feet, and water supplies) are not provided with the bath and must be ordered separately.

Fig. 1			FINISHED WALL
			(14-1/2)
			368mm
			324mm
C/L OF 1/2 NPT			(12-3/4)
SUPPLIES
57mm			203mm
		108mm	(8)
(2-1/4)
		(4-1/4)
343mm
89mm (13-1/2)
(3-1/2)
TYP.			699mm
			(27-1/2)
953mm
(37-1/2)	H	114mm
C/L		(4-1/2)
OUTLINE OF	C
SKID RESISTANT
	*
SURFACE
724mm
(28-1/2)
C/L OF	114mm
DRAIN	(4-1/2)		1/2 N.P.T. INLETS
1832mm			508mm (20)
(72-1/8)
FINISHED WALL			WALL FLANGES
			W/SCREWS
			PROVIDE CROSS
			BRACING IN WALL
			FOR ANCHORS

				C/L OF
				OVERFLOW
	870mm		584mm
			(23)
	(34-1/4)			140mm
692mm
	REF.			(5-1/2)
(27-1/4)
REMINISCENCE	FINISHED	38mm	REMINISCENCE	127mm
FOOT	FLOOR	(1-1.2)		(5)
			BALL &
		1-3/8 O.D.	CLAW FOOT	464mm
		TAILPIECE		(18-1/4)

REF.

FOR AFTER-SALES SERVICE CALL 1 (800) 223-0068 WEEKDAYS.

List of Required Components (not included):

•1591.170 Drain*

•9112.017 Bath Filler*

•9114.012 Water Supplies*

•9111.039 Ball & Claw Feet

•9110.039 Reminiscence Feet

* Available at your American Standard Distributor

List of Required Tools and Supplies:

Tools		Supplies
•	Drill	•	Putty
•	Drill bits for wood	•	Caulking (silicone)
	or tile	•	1/4" - 20 x 3"
•	Level			toggle bolts
•	Tape Measure	•	flat washers
•	Pipe Wrench			(as required)
•	Crescent Wrench	•	1/4" lockwasher (4)
•	Slip Joint Pliers	•	1/4" nut (4)
•	Screw Driver	•	Masonry Anchor
•	Standard			(concrete installations)
	Woodworking Tools	•	5/16" Lag Bolts
•	Personal Safety			(wood floor installations)
	Equipment
•	Caulking Gun
	GENERAL SPECIFICATIONS FOR 2908 BATHING POOL
	INSTALLED SIZE				72-1/8 x 37-1/2 x 27-1/4 In.
			(1832mm x 953 mm x 692mm)
	WEIGHT					130 Lbs. (59 Kg.)
	WEIGHT w/WATER					413 Lbs. (186 Kg.)
	GAL TO OVERFLOW						34 Gal. (129 L)
	BATHING WELL AT SUMP		18 x 42 In. (457mm x 1067mm)
	BATHING WELL AT RIM				67 x 31 In. (1702 x 787mm)
	WATER DEPTH TO OVERFLOW						14 In. (356 mm)
	FLOOR LOADING	22 LBS./Sq. Ft. (107 Kgs/Sq. m. )
	(PROJECTED AREA)
	PTS.							23.8
	CUBE (FT3)							48.3

INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS WITH HOMEOWNER AS THEY PROVIDE IMPORTANT CLEANING INFORMATION.

752515-100 Rev. D

© American Standard Inc. 2002

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.