American Standard 293 installation instructions

3	5
	After checking fit and
	alignment, turn lavatory upside
	down and apply a generous
	portion of sealant around the
	underside of the rim near the
	edge. Carefully lower lavatory
A	in place, align with marks made
	earlier, and press down firmly.
	Allow sealant to set before
	connecting supplies and drain.

	6
	Connect supply line to faucet
Mount the faucet and drain assembly (not included) on the	(finger tight) and carefully bend
	tubes to engage with the
lavatory following faucet manufacturer's instructions. Be
	supply shut-off valves. Tighten
certain to apply a bead of sealing putty on the underside of
	connections at faucet and
the drain (Part "A") in order to ensure a watertight seal
	shut-off valves for secure seal.
between the lavatory and drain. Remove excess putty after
installing drain on lavatory.	Shut-Off
	Valves

4	7
	Connect trap to drain assembly
	hand tight to check alignment. It
	may be necessary to cut off part	C
	of the tailpiece (area "B") or part
	of the horizontal leg of the trap	B
	(area "C"). Secure joints for
	watertight assembly.

Before applying the sealant, place the lavatory temporarily into the cut-out. Check for alignment and clearance. Then mark the lavatory and countertop in several places as a guide for the installation location.

In the United States:	In Canada:	In Mexico:
American Standard Brands	AS Canada ULC	Customer Service Manager
P.O. Box 6820	2480 Stanfield Rd.	AS Maquilia Mexico, S.A. de C.V.
Piscataway, New Jersey 08855	Mississauga, Ontario	Via Morelos #330
Attention: Director of Consumer Affairs	Canada L4Y 1S2	Col. Santa Clara
	Toll Free: (800) 387-0369	Ecatepec 55540 Edo. Mexico
For residents of the United States, warranty	www.americanstandard.ca	www.americanstandard.com.mx
information may also be obtained by calling the
following toll free number: (800) 442-1902
www.americanstandard-us.com

- 2 - 730524-100 Rev. B