American Standard 2735.014 dimensions Tank Nominal Dimensions, Compliance Certifications

TOWNSEND CHAMPION® 4 ROUND FRONT RIGHT HEIGHT™ TOILET

VITREOUS CHINA

TOWNSEND CHAMPION® 4 ROUND FRONT RIGHT HEIGHT™ TOILET

❑2735.014

•Vitreous china

•EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew

•Low-consumption (6.0 Lpf/1.6 gpf)

•Features Champion®4 Flushing System performance platform

•4" non-adjustable, piston action Accelerator™ flush valve

•16-1/2" rim height for accessible applications

•Round Front siphon action jetted bowl

•2-3/8" fully-glazed trapway

•Speed Connect™ tank/bowl coupling system

•Chrome-plated trip lever

•Sanitary pier on bowl

•100% factory flush tested

•2 bolt caps

•10 year warranty

❑3180.016 Round Front Right Height™ Bowl

❑4281.014 Tank

Nominal Dimensions:

721 x 479 x 873mm

(28-3/8" x 18-7/8" x 34-3/8")

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power

Supplementary Purchase Specification for

FINISHED WALL
	721mm
	(28-3/8)
19mm ± 6mm
(1 ± 1/4)	216mm
	(8-1/2)
	419mm
	(16-1/2)
	C/L OF SEAT POST HOLES
	140mm (5-1/2 CENTERS)
83mm 1/4)-(3		419mm
		(16-1/2)
	16mm
267mm	(5/8)
	379mm
(10-1/2)		FINISHED
	(14-7/8)
		FLOOR
305mm
	C/L OF OUTLET
(12)

479mm (18-7/8)

356mm

(14)

873mm

SUPPLY(34-3/8)

AS

REQ'D

254mm	FOOT ON
(10)
	BOTTOM
	OF BOWL
152mm
(6)
	284mm
	(11-3/16)

Non-Adjustability - July, 2003 revision

To Be Specified:

❏Color:

❏White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏Seat: (please specify color)

❏Champion® Slow Close Round Front #5330.010

❏Rise & Shine Round Front #5322.011

❏Laurel Round Front #5308.014

❏Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

	K22
© 2008 AS America Inc.		Revised 07/07