American Standard 3264.216 dimensions Retrospect Collection Right Height Elongated Toilet

RETROSPECT® COLLECTION

RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

RETROSPECT® COLLECTION ELONGATED

RIGHT HEIGHT™ TOILET

❑2405.016

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•Elongated siphon action jetted bowl with fully glazed 2" trapway

•16-3/4" rim height for accessible application

•AquaForce flushing technology

•Antique Chrome trip lever

•Sanitary bar on bowl

•2 color matched bolt caps

•100% factory flush tested

•Design coordinated to Retrospect Collection Sinks

❑3264.216 Bowl

❑ 4393.016 Tank	FINISHED WALL
Nominal Dimensions:	25 ± 6mm (1 ± 1/4")
		768mm
768 x 486 x 838mm		(30-1/4")		486mm
	(8-7/16")
				(19-1/8")
	214mm
(30-1/4" x 19-1/8" x 33")
Fixture only, seat and supply by others		C/L OF SEAT POST		C/L
		MTG HOLES ON
Compliance Certifications -		140mm (5-1/2") CTRS		(15-3/4")	838mm
		494mm
				400mm
Meets or Exceeds the Following Specifications:		(19-7/16")			(33")
• ASME A112.19.2M for Vitreous China Fixtures -			C/L OF SUPPLY
includes Flush Performance, Ball Pass Diameter,
			AS REQUIRED
Trap Seal Depth and all Dimension					425mm
					(16-3/4")
			*203mm(8")
90mm		13mm (1/2")	FINISHED	273mm
			FLOOR
(3-9/16")
				(11-5/8")
		389mm (15-5/16")
	305mm	168mm (6-5/8")			*152mm (6")
To Be Specified:		C/L OF OUTLET AND
	(12")	TOILET MTG BOLTS

❏Color: ❏ White

❏Seat: American Standard #5324.019 “Rise and Shine” solid plastic closed front, elongated seat

with cover.	NOTES:
❏ Alternate Seat: American Standard #5311.012
	THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
“Laurel” molded closed front seat with cover.	OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
❏ Supply with stop:	* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
	SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
	SEPARATELY.
	IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
	of tolerance established by ANSI Standard A112.19.2
	These measurements are subject to change or cancellation. No responsibility is
	assumed for use of superseded or voided pages
			MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
			ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
			BUILDING FACILITIES-CHECK LOCAL CODES.
		K48
© 2008 AS America Inc.				Revised 2/08