American Standard 4098.100, 3402.016 dimensions Glenwall Pressure-Assisted Wall-Mounted Toilet

GLENWALL™ PRESSURE-ASSISTED

WALL-MOUNTED TOILET

VITREOUS CHINA

BARRIER FREE

GLENWALL™ PRESSURE-ASSISTED TOILET

❏2093.100

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•Wall-mounted, back-outlet toilet

•Elongated bowl

•Fully-glazed 2" ballpass trapway

•10" x 12" water surface area

•Pressure-assisted siphon jet action

•Side-mounted chrome trip lever

•Close-coupled flushometer tank*

•Speed Connect® tank/bowl coupling system

•Sanitary bar on bowl

❏3402.016 Elongated bowl

❏4098.100 Tank complete with coupling components

Nominal Dimensions:

749 x 495 x 762 mm

(29-1/2" x 19-1/2" x 30")

Fixture only, seat and supply by others

Required working pressure range 25 psi - 80 psi

Alternate Configurations Available:

❏4098.700 Tank and tank cover only with tank cover locking device

❏4098.800 Tank and tank cover only with right hand trip lever

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2 for Vitreous China Fixtures

To Be Specified:
❏ Color: ❏ White	❏ Bone	❏ Linen
❏ Silver	❏ Fawn	Beige ❏ Black

❏Seat: American Standard #5324.019 “Rise and Shine” (with easy to clean lift-off hinge system) solid plastic closed front seat with cover.

❏Seat: American Standard #5311.012 “Laurel” molded closed front seat with cover.

❏Alternate Seat:

❏Supply with Stop:

* Flushmate III tank system by Flushmate® Div. of Sloan Valve Co

© 2008 AS America Inc.

FINISHED WALL

3/4 ± 1/4
(19mm	± 6mm)			19-1/2
	9			(495mm)
	(229mm)
	29-1/2			C/L
	(749mm)			14-3/4
	C/L OF SEAT POST HOLES			(375mm)
	5-1/2 (140mm CENTERS)		6		30
	18-1/2		(152mm)		(762mm)
					OR
	(470mm)
					32
					(813mm)
3-1/4			8-1/2
(83mm)
		14-1/2	(216mm)	9	191mm
				(229mm)
					(7-1/2)
		(368mm)
5-1/4		OR	* 7-1/2		3-1/4
(133mm)	FIN.	16-1/2
					(83mm)
	FLOOR	(419mm)	(191mm)
3-7/8
(98mm)	4-1/8
			SUPPLY AS		3/4 (19mm)
	(105mm)
					REF.
5/8	OR		REQUIRED
(16mm)	6-1/8			(4) 7/8
	(156mm)			(22mm) DIA. HOLES
1-1/2
(38mm)	C/L OF WASTE
	OUTLET

NOTES:

WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE- FELT (WAX RING NOT RECOMMENDED)

SUGGEST 1/16" CLEARANCE BETWEEN FACE AT WALL AND BACK OF BOWL.

CARRIER FITTING AS REQUIRED TO BE FIGURED AND FURNISHED BY OTHERS.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.

M44

Revised 2/08