American Standard 3461.128/3462.128/3465.128/3466.128, 3463.128/3464.128, Revised 12/08

MADERA™ FloWise® 16-1/2" HEIGHT 1.28 GPF FLUSHOMETER TOILET

BARRIER FREE

3461.128/3462.128/3465.128/3466.128

FINISHED WALL

1" N.P.T. OR 1" C.W.T. SUPPLY TO FLUSH VALVE

102mm

(4)

25mm

(1)

718mm (28-1/4)

470mm (18-1/2)

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS

121mm

(4-3/4)711mm (28)

356mm (14)

1 - 1/2

SPUD

419mm (16-1/2)

13mm

(1/2)

	338mm	FINISHED
		FLOOR
(13-5/16)

150mm (5-7/8)

238mm (9-3/8)

254mm

(10)C/L OF OUTLET

3463.128/3464.128

FINISHED WALL

718mm (28-1/4)

76mm		470mm		356mm
(3)	(18-1/2)		(14)

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS

438mm (17-1/4)

419mm (16-1/2)

			338mm
				FINISHED
	(13-5/16)
		150mm		FLOOR		238mm
	(5-7/8)
13mm					(9-3/8)
(1/2)

254mm

(10)C/L OF OUTLET

	NOTES:
	PRODUCT 3451.160 AND 3453.160 SHOWN, 3452.160 AND 3455.160
	SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.
	TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
	BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST
	VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
	THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
	OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM
	FINISHED WALL TO C/L OF OUTLET.
	FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
	ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR
	12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED.
	REFER TO VALVE MANUFACTURER AND LOCAL CODES.
	IMPORTANT: Dimensions of fixtures are nominal and may vary within
	the range of tolerances established by ANSI Standard A112.19.2. These
	measurements are subject to change or cancellation. No responsibility is
	assumed for use of superseded or voided pages.
		M62
© 2008 AS America Inc.			Revised 12/08