GREEN TEA™ 5-1/2' x 36"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

 

 

66

 

 

 

(1676mm)

14-3/4

 

 

 

(292mm)

OUTLINE OF CUTOUT 58.5 x 34.5 (1486 x 876mm)

11-1/2

(292mm)

 

 

 

PUMP

 

 

36

 

 

(914mm)

 

 

 

 

 

9

C

 

 

(229mm)

L

 

 

 

 

CUTOUT IN FLOOR FOR DRAIN

 

PROVIDE ACCESS TO PUMP FOR

(2) AIR VALVES

SERVICE ON ALL INSTALLATIONS

ON/OFF

 

C/L OF OVERFLOW

SWITCH

 

 

2

4

LEVELING STRINGER NOT

(102mm)

(51mm)

FOR SUPPORT

 

 

 

 

 

19

 

21

(483mm)

 

 

SAFE-T-HEATER

ROUGH (533mm)

 

 

REMOVABLE

FLOOR

 

 

BLANK

INTEGRAL FEET

 

 

66

(1676mm)14-3/4(292mm)

11-1/2

(292mm)

(9

9

(229mm)

CUTOUT IN FLOOR FOR DRAIN

C/L OF OVERFLOW

2

4

LEVELING STRINGER NOT

(102mm)

FOR SUPPORT

(51mm)

 

 

19

 

21

(483mm)

ROUGH (533mm)

 

FLOOR

 

 

INTEGRAL FEET

 

GENERAL SPECIFICATIONS FOR 3572 WHIRLPOOL

INSTALLED SIZE

 

 

 

 

 

 

 

 

66 x 36 x 21 In. (1676 x 914 x 533mm)

 

 

 

 

 

 

 

 

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 Lbs. (45 Kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WEIGHT w/WATER

 

 

 

 

 

 

 

 

 

 

 

592 Lbs. (269 Kg.)

GAL. TO OVERFLOW

 

 

 

 

 

 

 

 

 

 

 

 

59 Gal. (223 L.)

MIN. OPERATING GAL.

 

 

 

 

 

 

 

 

44 Gal. (167 L.)

BATHING WELL AT SUMP

 

 

 

 

19 x 49 In. (483mm x 1245mm)

BATHING WELL AT RIM

 

 

 

 

54-1/2 x 27 In. (1384mm x 686mm)

 

 

 

 

WATER DEPTH TO OVERFLOW

 

 

 

 

 

 

 

 

 

14 In. (356mm)

 

 

 

 

 

 

 

 

 

FLOOR LOADING

 

 

 

 

 

36 Lbs./Sq. Ft. (175 Kgs/Sq. m.)

 

 

 

 

 

(PROJECTED AREA)

 

 

 

 

 

 

 

 

 

 

 

PTS.

 

 

 

 

 

 

25.6

CUBE (FT3)

 

 

45.1

 

 

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP

 

1.4 HP, 7.5 AMPS, 120V.

 

GENERAL SPECIFICATIONS FOR 3572 BATHING POOL

INSTALLED SIZE

 

 

 

 

 

 

 

66 x 36 x 21 In. (1676 x 914 x 533mm)

 

 

 

 

 

 

 

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

66 Lbs. (30 Kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

WEIGHT w/WATER

 

 

 

 

 

 

 

 

 

557 Lbs. (253 Kg.)

GAL. TO OVERFLOW

 

 

 

 

 

 

 

 

 

 

59 Gal. (223 L.)

BATHING WELL AT SUMP

 

 

 

 

19 x 49 In. (483mm x 1245mm)

BATHING WELL AT RIM

 

 

 

 

54-1/2 x 27 In. (1384mm x 686mm)

 

 

 

 

WATER DEPTH TO OVERFLOW

 

 

 

 

 

 

 

 

14 In. (356mm)

 

 

 

 

 

 

 

 

FLOOR LOADING

 

 

 

 

34 Lbs./Sq. Ft. (165 Kgs/Sq. m.)

(PROJECTED AREA)

 

 

 

 

 

 

 

 

 

 

PTS.

 

 

 

 

 

 

25.6

CUBE (FT3)

 

 

45.1

 

 

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9260.018 OR 9360.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leafl et.

 

H4

 

© 2007 American Standard Inc.

Rev. 11/07

 

Page 2
Image 2
American Standard 3572.002, 3572.018WC General Specifications for 3572 Whirlpool, Whirlpool Electrical Specifications