GREEN TEA™ 5' x 42"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

60

 

60

 

(1524mm)

14-3/4

(1524mm)

14-3/4

 

(375mm)

 

(375mm)

OUTLINE OF CUTOUT 58.5 x 34.5 (1486 x 876mm)

11-1/2

OUTLINE OF CUTOUT 58.5 x 34.5 (1486 x 876mm)

11-1/2

 

(292mm)

 

(292mm)

 

42

 

42

 

(1067mm)

 

(1067mm)

PUMP

 

 

 

9

C

9

C

(229mm)

L

(229mm)

 

 

 

 

CUTOUT IN FLOOR FOR DRAIN

 

CUTOUT IN FLOOR FOR DRAIN

 

 

 

 

PROVIDE ACCESS TO PUMP FOR

ON/OFF

(2) AIR VALVES

 

 

 

SERVICE ON ALL INSTALLATIONS

SWITCH

 

C/L OF OVERFLOW

 

C/L OF OVERFLOW

 

2

 

4

LEVELING STRINGER NOT

4

LEVELING STRINGER NOT

2

(102mm)

FOR SUPPORT

 

(51mm)

(102mm)

FOR SUPPORT

(51mm)

 

 

 

19

 

21

19

 

21

 

(483mm)

 

(483mm)

(533mm)

 

SAFE-T-HEATER

(533mm)

 

ROUGH

 

 

REMOVABLE

ROUGH

 

 

FLOOR

 

 

FLOOR

 

 

 

 

BLANK

 

 

INTEGRAL FEET

 

INTEGRAL FEET

 

 

 

 

GENERAL SPECIFICATIONS FOR 3574 WHIRLPOOL

INSTALLED SIZE

 

 

 

 

 

 

 

59-3/4 x 42 x 21 In. (1518 x 1060 x 533mm)

 

 

 

 

 

 

 

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

115 Lbs. (52 Kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WEIGHT w/WATER

 

 

 

 

 

 

 

 

 

 

656 Lbs. (298 Kg.)

GAL. TO OVERFLOW

 

 

 

 

 

 

 

 

 

 

 

 

65 Gal. (246 L.)

MIN. OPERATING GAL.

 

 

 

 

 

 

 

 

 

47 Gal. (178 L.)

 

 

 

 

 

 

 

 

 

BATHING WELL AT SUMP

 

 

 

24-1/2 x 42 In. (622mm x 1067mm)

BATHING WELL AT RIM

 

 

 

 

 

 

48 x 33 In. (1219mm x 838mm)

 

 

 

 

 

 

WATER DEPTH TO OVERFLOW

 

 

 

 

 

 

 

 

14 In. (356mm)

 

 

 

 

 

 

 

 

FLOOR LOADING

 

 

 

 

 

 

38 Lbs./Sq. Ft. (185 Kgs/Sq. m.)

 

 

 

 

 

 

(PROJECTED AREA)

 

 

 

 

 

 

 

 

 

 

 

 

PTS.

 

 

 

 

 

 

 

27.8

CUBE (FT3)

 

 

 

47.4

 

 

 

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP

 

1.4 HP, 7.5 AMPS, 120V.

 

GENERAL SPECIFICATIONS FOR 3574 BATHING POOL

INSTALLED SIZE

 

 

 

 

 

 

59-3/4 x 42 x 21 In. (1518 x 1060 x 533mm)

 

 

 

 

 

 

WEIGHT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

78 Lbs. (35 Kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

WEIGHT w/WATER

 

 

 

 

 

 

 

 

 

619 Lbs. (281 Kg.)

GAL. TO OVERFLOW

 

 

 

 

 

 

 

 

 

 

65 Gal. (246 L.)

BATHING WELL AT SUMP

 

 

 

24-1/2 x 42 In. (622mm x 1067mm)

BATHING WELL AT RIM

 

 

 

 

 

 

48 x 33 In. (1219mm x 838mm)

 

 

 

 

 

 

WATER DEPTH TO OVERFLOW

 

 

 

 

 

 

 

14 In. (356mm)

FLOOR LOADING

 

 

 

 

 

36 Lbs./Sq. Ft. (175 Kgs/Sq. m.)

 

 

 

 

 

(PROJECTED AREA)

 

 

 

 

 

 

 

 

 

 

 

PTS.

 

 

 

 

 

 

 

27.8

CUBE (FT3)

 

 

 

47.4

 

 

 

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9260.018 OR 9360.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT: Dimensions of fi xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leafl et.

 

H8

 

© 2007 American Standard Inc.

Rev. 11/07

 

Page 2
Image 2
American Standard 3574.018WC, 3574.002 General Specifications for 3574 Whirlpool, Whirlpool Electrical Specifications