American Standard 6042.BWTS, 3636.SWTS, 4834.SWTS, 3838.CWTS Finishing, Maintenance

Models: 3838.CWTS 4834.SWTS 6042.BWTS 3636.SWTS

1 5
Download 5 pages 45.87 Kb
Page 5
Image 5
5 FINISHING:

5 FINISHING:

After the adhesive is set, remove the shim and caulk the exposed seams with silicone sealant. Exposed seams must be caulked with a clear or matching silicone sealant. The freshened caulked lines can be smoothed and excess sealant removed by running a clean, damp cloth along the seams.

Apply trim (if any) and accesories (soap dish, etc.) with clear or matching silicone sealants and prop into place until the sealant sets.

6 MAINTENANCE:

Clean up of silicone sealants or mastics, should follow manufacturer's recommendation. For daily care and cleaning, refer to the American Standard maintenance label provided with the Corian® solid product shower walls. Always provide adequate ventilation while working.

AMERICAN STANDARD TEN-YEAR LIMITED WARRANTY

6 MAINTENANCE:CORIAN® PROODUCT

If, within ten years after its initial purchase, inspection of the AMERICAN STANDARD TEN-YEAR LIMITED WARRANTY Corian portion of this American Standard product, confirms that it is defective in materials or workmanship, American Standard will repair or, at its option, exchange the product for a similar model or refund the purchase price.

This warranty applies only to the original purchaser and installation of these products. All labor and transportation costs or charges incidental to warranty service are to be borne by the original consumer- purchaser.

This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a local building or plumbing contractor to insure local code compliance before installation.

This warranty shall be void if the product has been fabricated or modified in a manner inconsistent with the product as shipped by American-Standard; moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damages; or if it was not installed in accordance with American Standard's instructions.

American Standard's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation, nor shall American Standard be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a defective product, all of which are expressly excluded from this warranty. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you.)

This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state of from province to province, in which case this warranty does not affect such statutory rights.

In the United States:

American Standard Inc.,

P.O. Box 6820

Piscataway, New Jersey 08855

Attention: Director of Consumer Affairs

For residents of the United States, warranty information may also be obtained by calling the following toll free number: (800) 442-1902

In Canada:

In Mexico:

American-Standard,

Customer Service Manager

2480 Stanfield Road

Ideal Standard, S.A. de C.V.

Mississauga, Ontario

Via Morelos #330

Canada L4Y 1S2

Col. Santa Clara

 

Ecatepec 55540 Edo. Mexico

Toll Free: (800) 387-0369

 

www.americanstandard-us.comwww.americanstandard-ca.com

7 5 2 7 7 0 - 1 0 0 R e v . B

Page 5
Image 5
American Standard 6042.BWTS, 3636.SWTS Finishing, Maintenance, American Standard Ten-Year Limited Warranty Corian Prooduct