American Standard 2383.012, 4021.016 dimensions Cadet Elongated Toilet, Cadet 3 Elongated Toilet

CADET® 3

ELONGATED TOILET

VITREOUS CHINA

CADET® 3 ELONGATED TOILET
❑ 2383.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• EverClean® surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Features the Cadet® 3 Flushing System
• Elongated siphon action jetted bowl
• Fully-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect® tank-to-bowl
coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 100% factory flush tested
• 5 year warranty
❑ 3014.016 Elongated Bowl
❑ 4021.016 Tank	SEE REVERSE FOR ADDITIONAL ROUGHING-IN
Nominal Dimensions:	DIMENSIONS
768 x 438 x 733mm (30-1/4" x 17-1/4" x 28-7/8")
Fixture only, seat and supply by others
	To Be Specified:
Alternative Tank Configurations Available:
	❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❑ 4021.500 Tank complete with Aquaguard Liner
	❏ Seat: #5325.010 Elongated Champion® Slow Close
❑ 4021.600 Tank complete with tank cover	solid plastic seat and cover with easy lift off feature
locking device
	❏ Seat: #5284.016 Elongated EverClean® solid plastic
❑ 4021.700 Tank complete with Aquaguard Liner	seat and cover
and tank cover locking device	❏ Seat: #5321.110 EverClean® Elongated Seat with
❑ 4021.800 Tank complete with trip lever located	Slow Close Snap-Off Hinges
on right side	❏ Supply with stop:

❑4021.900 Tank complete with tank cover locking device and trip lever located on right side

❑4021.950 Tank complete with Aquaguard liner,

tank cover locking devise, and trip lever on right side

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,	NOTES:
Trap Seal Depth and all Dimensions	THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
	305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
• Los Angeles Department of Water and Power	SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
Supplementary Purchase Specification for	SEPARATELY.
	* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
Non-Adjustability	IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
	of tolerances established by ANSI Standard A112.19.2.
	These measurements are subject to change or cancellation. No responsibility is
	assumed for use of superseded or voided pages.
	K61
© 2008 AS America Inc.		Revised 2/08