American Standard 5' x 36 CADET 5 x WHIRLPOOL AND BATHING POOL, High Gloss, Revised 2/08

CADET™ 5' x 36"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

					PROVIDE ACCESS TO PUMP FOR
					SERVICING ON ALL INSTALLATIONS
					1524 mm
			305 mm	(60)
				RECOMMENDED FITTING LOCATION
235 mm		(12)
					64 X 330mm (2-1/2 x 13")
(9-1/4)
	19 mm				FOR PIER OR ISLAND
						ON/OFF
	(3/4)				INSTALLATIONS ONLY	SWITCH

FINISHED

					1524 mm
			305 mm	(60)
				RECOMMENDED FITTING LOCATION
235 mm		(12)
					64 X 330mm (2-1/2 x 13")
(9-1/4)
	19 mm				FOR PIER OR ISLAND
	(3/4)				INSTALLATIONS ONLY

FINISHED

SEE FITTING WALL

SPECS FOR

SEE FITTING SPECS FOR DIMENSIONS

WALL

DIMENSIONS

ALT. FITTING
LOCATION #2
64 x 330mm
(2-1/2 x 13")	229 mm
	(9)

		229 mm
		(9)
914 mm			PUMP
(36)		CUTOUT IN FLOOR
457 mm
		FOR DRAIN
(18)
C/L OF	57 mm	(8) JETS	(2) AIR VALVES	OUTLINE OF CUTOUT
SUPPLIES	(2-1/4)		ALT. FITTING	1486 mm x 876 mm
				(58-1/2 X 34-1/2)
	C/L OF DRAIN		LOCATION #1
			C/L OF

914 mm

(36)CUTOUT IN FLOOR

457 mmFOR DRAIN

(18)
C/L OF	57 mm
SUPPLIES	(2-1/4)	ALT. FITTING
	C/L OF DRAIN	LOCATION #1
		C/L OF
		SHOWER ARM

OUTLINE OF CUTOUT 1486 mm x 876 mm (58-1/2 X 34-1/2)

				SHOWER ARM
OPTIONAL TO
FINISHED FLOOR				C/L OF
USUALLY BETWEEN
1651 & 1981mm				VALVES
(65 & 78)	C/L OF
				C/L OF
	OVERFLOW 38 mm		305 mm
				SPOUT	LEVELING
	(1-1/2)		(12)
			102 mm	SAFE-T-HEATER	STRINGER
	76 mm
				REMOVABLE	NOT FOR
	(3)		(4)
				BLANK	SUPPORT
	502 mm
	(19-3/4)				464 mm
	ROUGH				(18-1/4)
	FLOOR
	INTEGRAL		1-1/2 N.P.T.M.
	SUPPORT		THREADS	70 mm
	FEET	1-1/2 O.D.TAILPIECE		(2-3/4)
				117 mm
				(4-5/8)

OPTIONAL TO

FINISHED FLOOR

C/L OF

USUALLY BETWEEN

1651 & 1981mm

VALVES

(65 & 78)

C/L OF

C/L OF

OVERFLOW 38 mm

305 mm

SPOUT

(1-1/2)

(12)

102 mm

LEVELING STRINGER

67 mm

(2-5/8)

(4)

NOT FOR SUPPORT

502 mm

(19-3/4)

464 mm

ROUGH

(18-1/4)

FLOOR

INTEGRAL

1-1/2 N.P.T.M.

SUPPORT

THREADS

70 mm

FEET 1-1/2 O.D.TAILPIECE

(2-3/4)

117 mm

(4-5/8)

GENERAL SPECIFICATIONS FOR 2771 WHIRLPOOL

INSTALLED SIZE	60 x 36 x 19-3/4 In.(1524 x 914 x 502mm)
WEIGHT					95 Lbs. (43 Kg.)
WEIGHT w/WATER				587 Lbs. (267 Kg.)
GAL. TO OVERFLOW					59 Gal. (224 L.)
MIN. OPERATING GAL.					48 Gal. (182 L.)
BATHING WELL AT SUMP			40 x 22 In. (1016 x 559mm)
BATHING WELL AT RIM			52 x 29 In. (1321 x 737mm)
WATER DEPTH TO OVERFLOW				13-1/4 In. (337mm)
FLOOR LOADING		39 Lbs./Sq. Ft. (188 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.						23.8
CUBE (FT3)							44.5

WHIRLPOOL ELECTRICAL SPECIFICATIONS

SYSTEM I PUMP 1.6 HP, 9.7 AMPS, 120V.

NOTES:

GENERAL SPECIFICATIONS FOR 2771 BATHING POOL

INSTALLED SIZE				60 x 36 x 19-3/4 In.
			(1524mm x 914 mm x 502mm)
WEIGHT						70 Lbs. (32 Kg.)
WEIGHT w/WATER					562 Lbs. (255 Kg)
GAL. TO OVERFLOW						59 Gal. (224 L.)
BATHING WELL AT SUMP		40 x 22 In. (1016mm x 559mm)
BATHING WELL AT RIM		52 x 29 In. (1321mm x 737mm)
WATER DEPTH TO OVERFLOW				13-1/4 In. (337mm)
FLOOR LOADING	37 LBS./Sq. Ft. (180 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.							23.8
CUBE (FT3)							44.5

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9260.018 OR 9360.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.

●FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

●IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

	H62
© 2008 AS America Inc.		Revised 2/08