Installation

STANDARD

Instructions

COLLECTION

6726

24" TOWEL BAR & GLASS SHELF

 

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1

U.S. Patent No. D403,750

M 9 6 8 2 1 8 B

Recommended Tools

Regular Screwdriver

10'

Drill

 

Tape Measure

Phillips Screwdriver

 

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

1 24" TOWEL BAR & GLASS SHELF

The 24" TOWEL BAR & GLASS SHELF (1) works best if secured to a wall stud or cross brace within the wall, using the SCREWS (3) supplied.

If the 24" TOWEL BAR & GLASS SHELF (1) is to be installed on a tile or plaster wall the TILE ANCHORS (4) or DRYWALL ANCHORS(6) and SCREWS (3) should be used.

Determine desired height and location (optional) and mark a center line. For the 24" TOWEL BAR (2) mark a centerline 24" horizontally from the first location. Using the MOUNTING PLATE (5) as a template mark the two spots for the mounting holes. Repeat for the other MOUNTING PLATE (5). If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (4).

For installations on drywall, use DRYWALL ANCHORS (6) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with the wall. Place MOUNTING PLATE (5) over DRYWALL ANCHORS (6) and insert SCREWS (3) with #2 Phillips screwdriver. See illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (3).

For installations on tiled walls, If TILE ANCHORS (4) and SCREWS (3) are used for securing MOUNTING PLATE (5), then drill two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (4) flush with face of the finished wall. Secure MOUNTING PLATE (5) to wall with SCREWS (3).

For the 24" TOWEL BAR & GLASS SHELF (1), Install TOWEL BAR (2) into bottom of SUPPORT POSTS (10, 10a). Align slot in towel bar with notch in recess of support post (10, 10a) (see Figure A). Install the WASHER (11), GLASS SHELF (15), WASHER (11) onto SUPPORT POSTS (10, 10a). Install and tighten SCREWS (13). See illustration.

Install the WALL ESCUTCHEON (7) on the MOUNTING PLATES (5). Place 24" TOWEL BAR & GLASS SHELF (1) onto MOUNTING PLATES (5). Secure using SCREWS (14) and tighten.

Push INDEX BUTTONS (9) into the SUPPORT POSTS (10, 10a). See illustration.

 

13

 

 

 

 

 

7

11

 

 

12

 

USE MOUNTING PLATE

3

4

 

AS TEMPLATE

 

 

 

 

3

5

6

11

 

 

4

 

 

 

 

 

CENTER

 

 

 

LINE

 

9

 

48 TO 68

5

14

 

INCHES FROM

6

FLOOR

 

 

 

FINISHED

 

 

4

10 10a

 

WALL

 

 

 

2

24"

1

CENTER LINE

48" TO 68" (OPTIONAL)

Figure A

SLOT IN TOWEL BAR

NOTCH IN RECESS OF SUPPORT POST

Page 1 Page 2
Page 1
Image 1
American Standard 6726 installation instructions Standard, Collection, Care Instructions
Page 1 Page 2

6726 specifications

The American Standard 6726 is a premier high-efficiency toilet that combines modern design with innovative technologies to deliver exceptional performance. Designed with the consumer’s needs in mind, this toilet model is a testament to American Standard’s commitment to quality and sustainability.

One of the standout features of the American Standard 6726 is its EverClean surface. This unique coating inhibits the growth of stain and odor-causing bacteria, mold, and mildew, ensuring that your toilet stays cleaner for longer. This not only enhances hygiene but also reduces the frequency of cleaning, making it a practical choice for busy households.

The 6726 model utilizes American Standard’s patented Siphon Jet technology. This powerful flushing system provides a strong, efficient flush that eliminates waste effectively while using only 1.28 gallons of water per flush. This water-saving capability meets EPA WaterSense criteria, making it an eco-friendly choice that can significantly reduce water bills without sacrificing performance.

Designed with comfort in mind, the American Standard 6726 features an elongated bowl that provides extra space and comfort compared to standard round bowls. The height of the toilet is also ADA-compliant, making it accessible for individuals with mobility challenges, enhancing convenience for all users.

Moreover, the toilet’s sleek, modern design complements a range of bathroom styles, from contemporary to traditional. Its high-profile tank and clean lines bring elegance to any restroom, while the durable vitreous china construction ensures long-lasting durability and ease of maintenance.

Installation of the American Standard 6726 is straightforward, thanks to its standard height and cohesive design. It includes pre-installed features that simplify the setup process, making it an ideal choice for both professional plumbers and DIY enthusiasts.

In summary, the American Standard 6726 toilet stands out with its innovative technologies, including the EverClean surface and Siphon Jet flushing system, while promoting water conservation and offering superior comfort. Its aesthetic appeal and practical characteristics make it a top choice for any bathroom renovation or construction project. This model is not only an investment in quality but also a step towards a more sustainable lifestyle.
Top Page Image Contents