American Standard 7010.180 installation instructions 18TOWEL BAR, 24TOWEL BAR, Glass Shelf

Installation
Instructions
GREEN TEA	7010.180
18"TOWEL BAR	7010.240
24"TOWEL BAR	7010.024
GLASS SHELF
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please Certified to comply with ANSI A112.18.1
read instructions carefully before you begin.	M 9 6 8 6 3 1

Recommended Tools

10'

Tape Measure Level

Regular Screwdriver Phillips Screwdriver

Drill

1MOUNTING BRACKET INSTALLATION

18" TOWEL BAR, 24" TOWEL BAR AND 24" GLASS SHELF

The 18" TOWEL BAR, 24" TOWEL BAR and GLASS SHELF work best if secured to a wall stud or cross brace within the wall, using 1-1/2" long SCREWS (3) not supplioed.

If the 18" TOWEL BAR, 24" TOWEL BAR and GLASS SHELF are to be installed on a tile or plaster wall the ANCHORS and SCREWS should be used.

Determine desired height and location (optional) for the accessory and mark a center line. Use the full size template supplied to mark hole locations for the mounting brackets. For the 24" TOWEL BAR and GLASS SHELF use 24” template. For 18” TOWEL BAR use 18” template. If MOUNTING BRACKET (1) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).

For installations on drywall or tiled walls, use ANCHORS (4) and SCREWS (2) for securing MOUNTING BRACKETS (1) to wall. Use MOUNTING BRACKET (1) as a template and mark the mounting holes. Drill three 1/8" diameter holes a minimum of 1-1/4" deep. Insert the three ANCHORS (4) flush with face of the finished wall.

Secure MOUNTING PLATES (1) to wall with SCREWS (2).

				18" (457mm)
			1a	or
2				24" (610mm)
	INSTALL 18" TOWEL BAR, AND 24" TOWEL BAR	5a
		6		CENTER
	Place right ESCUTCHEON (5) onto MOUNTING BRACKET (1), and secure			LINE
	with SET SCREW (6) using 2.5 mm HEX WRENCH (7) supplied.			LEVEL
	Place LEFT ESCUTCHEON (5a) onto MOUNTING BRACKET (1a) and			1
	secure with SET SCREW (6) using 2.5 mm HEX WRENCH (7) supplied.

			7010.024	24" (610mm) 7010.240
			GLASS SHELF	24" TOWEL BAR
		18" (457mm)
			7010.180
			18" TOWEL BAR
MOUNTING BRACKET	MOUNTING			FINISHED WALL	MOUNTING BRACKET
for GLASS SHELVE					for GLASS SHELVE
	BRACKET
		CENTER
		LINE
		DRILL 3 PILOT HOLES FOR
MOUNTING	ANCHORS	WOOD SCREWS (2) OR
SCREWS		1/8" DIA. HOLES FOR	TEMPLATE
(SUPPLIED)		ANCHORS (4)

	5
CENTER LINE	6
(OPTIONAL TO

FINISHED FLOOR)

7

1-1/2"

1

2 3

POSITION OF

MOUNTING BRACKET

FOR TOWEL BARS

CENTER

LINE

DRILL 3 PILOT HOLES FOR

4WOOD SCREWS (2) OR 1/8" DIA. HOLES FOR ANCHORS (4)

4

2

1 5, 5a

6

FINISHED WALL