American Standard 7236VC Evolution, Whirlpool And Bathing Pool, High Gloss, Revised 3/06

72 x 36 x 21-1/2 (1829 x 914 x 546mm) 91 Lbs. (41 Kg.)

1016 Lbs. (461 Kg.)

111 Gal. (420 L.) 53-1/2 x 26-1/4 In. (1359 x 667mm)

EVOLUTION™ 6' X 36"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

72"
(1829mm)		11"
		(279mm)
		3-1/4"
		(83mm)
		13-3/4"
	7-3/4"	(349mm)
3"	(197mm)
(76mm)
		6"
		(152mm)
	CUT OUT IN FLOOR
	FOR DRAIN

36"

(914mm)

36"

(914mm)

21-1/2"(H)

(546mm)

20"(C)

(508mm)

C/L OF

OVERFLOW

20-1/8"(A)

(511mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 7236V WHIRLPOOL

INSTALLED SIZE	72 x 36 x 21-1/2 In. (1829 x 914 x 546mm)
WEIGHT		106 Lbs. (48 Kg.)
WEIGHT w/WATER		1031 Lbs. (467 Kg.)
GAL. TO OVERFLOW		111 Gal. (420 L)
WHIRLPOOL MIN. OPERATING VOL.		53 Gal. (201 L)
BATHING WELL AT SUMP		53-1/2 x 26-1/4 In. (1359 x 667mm)
BATHING WELL AT RIM		64-1/2 x 30 In. (1638 x 762mm)
WATER DEPTH TO OVERFLOW		18-1/2 In.(470mm)
FLOOR LOADING		57 Lbs./Sq.Ft. (280 Kgs./Sq.m)
(PROJECTED AREA)

	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP	2.1 HP,14.4 AMPS,120V.

GENERAL SPECIFICATIONS FOR 7236V BATHING POOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM	64-1/2 x 30 In. (1638 x 762mm)
WATER DEPTH TO OVERFLOW		18-1/2 (470mm)
FLOOR LOADING	56 Lbs./Sq.Ft. (275 Kgs./Sq.m)
(PROJECTED AREA)

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL, DECK MOUNTED SPOUT AND INTEGRATED BATH FILLER FOR ADDITIONAL INFORMATION.

OPTIONAL 3-WALL TILING BEAD KIT No. TILE-BEAD AND APRON No. 6FT-APRON MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

	H96
© 2008 AS America Inc.		Revised 3/06