| Installation |
ACCESSORIES | Instructions |
24" TOWEL SHELF with TOWEL BAR | 8040.300 |
Thank you for selecting |
|
|
quality for over 100 years. |
|
|
To ensure that your installation proceeds |
|
|
please read these instructions carefully before you begin. | Certified to comply with ANSI A112.18.1 |
|
|
| |
| U.S. Patent No. D403,750 | M 9 6 8 2 4 8 A |
Recommended Tools
Tape Measure | Regular Screwdriver |
| |
10' |
|
| Drill |
Hex Wrench | Phillips Screwdriver |
|
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
1 24" TOWEL SHELF with TOWEL BAR
Install 24" TOWEL SHELF (2) and TOWEL BAR (1) onto front of MOUNTING PLATES (5) (see Figure A). Secure and tighten the HEX BOLTS (7), from back of MOUNTING PLATES (5) to secure.
The 24" TOWEL SHELF (2) with TOWEL BAR (1) works best if secured to a wall stud or cross brace within the wall, using the SCREWS (3) supplied.
Determine desired height and location (optional) and mark a center line. For the 24" TOWEL BAR (2) mark a centerline 24" horizontally from the first location. Using the MOUNTING PLATE (5) as a template mark the two spots for the ANCHORS (4). Repeat for the other MOUNTING PLATE (5). If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).(see Figure B).
For installations on drywall, use ANCHORS (4) and SCREWS (3) for securing MOUNTING PLATE (5) to wall. Drill two 1/4" dia. holes
then press into drywall until it is seated flush with the wall. Place MOUNTING PLATE (5) over ANCHORS (4) and insert SCREWS (3) provided with #2 Phillips screwdriver. See illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (3).
For installations on tiled walls, If ANCHORS (4) and SCREWS (3) are used for securing MOUNTING PLATE (5) drill two 1/4" dia. holes a minimum of
1" 
5
Figure C
23-3/4"
CENTER LINE
7 |
|
|
| |
Figure A |
|
|
|
|
2 |
|
| 1" | 48" TO 68" |
|
|
|
| |
3 | 5 | 4 | USE MOUNTING | (OPTIONAL) |
PLATE AS TEMPLATE |
| |||
|
|
|
|
| CENTER LINE |
BACK SIDE |
| 4 |
|
| |
7 | 2 | 3 |
|
|
Figure B
1
2
5
FRONT
1
4
3 1
FINISHED
WALL
