American Standard 9482.000 dimensions Ovalyn Universal Access Undercounter Sink, Bowl sizes

BARRIER FREE

OVALYN UNIVERSAL ACCESS™ UNDERCOUNTER SINK

VITREOUS CHINA

OVALYN UNIVERSAL ACCESS™ SINK

•Made from vitreous china

•Unglazed rim for under counter mount

•Rear overflow

•Supplied with mounting kit (047194-0070A) and template

❏9482.000

Nominal Dimensions: 489 x 400mm

(19-1/4" x 15-3/4")

Bowl sizes:
425mm (16-3/4") wide
337mm (13-1/4") front to back					610mm
140mm (5-1/2") deep		HOLE TYP.	70mm	(2)	(24)
		37mm(1-7/16) DIA.	FINISHED WALL	51mm
102mm (4") bowl depth	51mm		(2-3/4)
	(2) MIN.		C/L

Compliance Certifications -							(10-1/2)
							267mm
Meets or Exceeds the			337mm	UNDER			140mm		203mm	DRAWING FOR
Following Specifications:				COUNTER			(5-1/2)		(8)	DIMENSIONAL
			(13-1/4)				400mm
				BASIN RIM					MIN.	PURPOSES ONLY.
• ASME A112.19.2M for						COUNTER	(15-3/4)			IT IS NOT AN EXACT
				45°				864mm		REPRESENTATION.
						TOP
Vitreous China Fixtures						CUTOUT		(34)
								686mm
• CAN/CSA B45 series
								(27)
• 1995 National Building Code, section 3.7							MOUNTING	MIN.			152mm
											(6)
and CAN/CSA-B651-M90 and OBC 3.7.					425mm		CLIP				MAX.
					(16-3/4)		(SEE DETAIL)
					489mm				BARRIER FREE		229mm
					(19-1/4)					CLEARANCE
											(9)
			SEALING				COUNTERTOP				MIN.
			COMPOUND		16mm +3mm(1/8)
							(BY OTHERS)
					(5/8)	-2mm(1/16)
To Be Specified:
			140mm		92mm		(KIT No.047194-0070A)
❏ Color: ❏ White	❏ Bone						DETAIL OF MOUNTING CLIP
			*311mm					(3/4) MIN.
			(5-1/2)		(3-5/8)		BRASS	19mm
❏ Linen	❏ Silver		(12-1/4)				INSERT
							LAVA
❏ Fawn Beige		❏ Black	(10-1/2)
			*262mm			203mm
❏ Faucet*:						(8)		MACH.
						SUPPLIES
❏ Faucet Finish:								CLIP
						AS REQ'D		SCREW
❏ Supplies:						1-1/4	REFER TO INSTRUCTIONS
			1-1/4 O.D. TAILPIECE			O.D. WASTE	PROVIDED WITH KIT FOR
❏ 1-1/4" Trap:							ADDITIONAL INFORMATION
* See faucet section for additional models available

For Universal Design Options, top of counter may be mounted at 813mm (32") minimum from finished floor to meet ADA and ANSI A117.1 requirements. A 838mm (33") minimum mounting height is required for Ontario. Check local codes for heights and faucet handles requirements.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES -

CHECK LOCAL CODES.

Countertop 864mm (34") from finished floor. Lavatory installed 51mm (2") MIN. from front edge of countertop. Countertop thickness to be 25mm (1") maximum.

NOTES:

*DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE SUGGESTED.

▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH BASIN. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

USE ENCLOSED TEMPLATE FOR COUNTERTOP CUTOUT SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	J55
© 2008 AS America Inc.		Revised 2/08