Arch, Single Control | American Standard 4101.100

	Installation
ARCH	Instructions
ARCH	4101.100
SINGLE CONTROL
KITCHEN PULL-OUT FAUCET

Thank you for selecting American-Standard...

the benchmark of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.		Certiﬁed to comply with ANSI A112.18.1M
			M 9 6 8 5 6 6
RECOMMENDED
TOOLS
Adjustable Wrench	Regular Screwdriver	Phillips Screwdriver	Channel Locks

1 INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON

CAUTION	Turn off water at
	main supply.

Installation with ESCUTCHEON: Figure A. Apply a light bead of plumbers putty to underside of ESCUTCHEON (1) if mounting surface is uneven. Insert SEAL (1) into groove at base of faucet. Insert supply HOSES (2) and SHANK (3) through ESCUTCHEON (4) and mounting surface.

Assemble RUBBER WASHER (5), BRASS WASHER (6) and threaded LOCKNUT (7) onto SHANK (3) from underside of sink or mounting surface. Hand tighten LOCKNUT (7) and check that rotation of HANDLE (8) from HOT to COLD is centered.

Use a screwdriver to tighten SCREWS (9) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening the screws slightly each time until all are snug to ensure even pressure.

Installation for single hole mounting: Figure B. Insert SEAL (10) into groove at base of ESCUTCHEON (11). Insert

SEAL (1) into groove at base of faucet. Insert supply HOSES (2) and SHANK (3) through ESCUTCHEON (11) and mounting surface.

is centered.

Use a screwdriver to tighten SCREWS (9) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening the screws slightly each time until all are snug to ensure even pressure.