American Standard M968582 installation instructions Installation, Instructions, 4335.020.XXX

	Installation
PEKOE EXTENDER	Instructions
	4335.020.XXX
SINGLE CONTROL KITCHEN
POP-OUT SPRAY

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1M

M968582 REV. 1. 1

Recommended Tools

Phillips Screwdriver

Channel Locks Adjustable Wrench Plumbers' Putty or Caulking Tubing Cutter

1 INSTALL FITTING

	Turn off hot and cold water
CAUTION
	supplies before beginning.
Make certain the SEAL (1) is properly seated in recess
of faucet body.
Insert supply HOSES (2) and SHANK (3) through center
hole of sink or mounting surface.
Assemble RUBBER WASHER (4), PLASTIC WASHER (5),
METAL WASHER (6) and threaded LOCKNUT (7) onto
SHANK (3) from underside of sink or mounting surface.
Hand tighten LOCKNUT (7) and check that faucet is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (7).
Work your way around LOCKNUT (7), tightening the screws
slightly each time until all are snug to ensure even pressure.		RECESS

3

4

5

6

7

8

1

2