American Standard SPS 2773E, 2773EC CADET ELITE 6’ x 36”, Whirlpools By American Standard

CADET ELITE™ 6’ x 36”

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

					PROVIDE ACCESS TO PUMP FOR
					SERVICING ON ALL INSTALLATIONS
					1829 mm
			305 mm	(72)
				RECOMMENDED FITTING LOCATION
229mm		(12)
					64 X 330mm (2-1/2 x 13")
(9)
	19 mm				FOR PIER OR ISLAND
	(3/4)				INSTALLATIONS ONLY

FINISHED

SEE FITTING SPECS FOR DIMENSIONS

WALL

		229 mm
		(9)
908 mm						ON/OFF
					PUMP	SWITCH
(35-3/4)		CUTOUT IN FLOOR
454 mm
		FOR DRAIN
(17-7/8)
C/L OF	57mm				(2) AIR VALVES	OUTLINE OF CUTOUT
SUPPLIES	(2-1/4)		(8) JETS	ALT. FITTING		1791 mm x 870 mm
						(70-1/2 X 34-1/4)
	C/L OF DRAIN		LOCATION #1
					C/L OF
					SHOWER ARM
OPTIONAL TO
FINISHED FLOOR					C/L OF
USUALLY BETWEEN
1651 & 1981mm					VALVES	IN-LINE HEATER
(65 & 78)	C/L OF					REMOVABLE
					C/L OF	BLANK
	OVERFLOW		305mm
	38 mm		(12)		SPOUT	■ LEVELING STRINGER
	(1-1/2)
	70mm		102 mm			NOT FOR SUPPORT
	(2-3/4)		(4)
	502 mm
	(19-3/4)					464 mm
	ROUGH					(18-1/4)
	FLOOR
	INTEGRAL		1-1/2 N.P.T.M.
	SUPPORT		THREADS		70 mm
	FEET	1-1/2 O.D.TAILPIECE			(2-3/4)
					117 mm
					(4-5/8)

GENERAL SPECIFICATIONS FOR 2773E WHIRLPOOL

INSTALLED SIZE						72 x 35-3/4 x 19-3/4 In.
			(1829mm x 908 mm x 502mm)
WEIGHT							101 Lbs. (45 Kg.)
WEIGHT w/WATER							751 Lbs. (341 Kg)
GAL. TO OVERFLOW								78 Gal. (295 L.)
MIN. OPERATING GAL.								64 Gal. (242 L.)
BATHING WELL AT SUMP		23 x 49 In. (584 mm x 1245 mm)
BATHING WELL AT RIM				65 x 29 In. (1651 x 737 mm)
WATER DEPTH TO OVERFLOW							13-1/2 In. (343mm)
FLOOR LOADING		40 Lbs./Sq. Ft. (190 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.									23.8
CUBE (FT3)										48.3
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP					2.1 HP, 14.4 AMPS, 120V.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD. KIT No. TILE-BEAD AND APRON No.6FTE-APRON AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

© 2003 American Standard Inc.