1INSTALL VALVE TRIM
Figure 1. Remove plaster guard from valve. Push CAP (1) over VALVE CARTRIDGE (2) until seated against stop.
Figure 2. Push ESCUTCHEON HOLDER (3) onto CAP (1) and attach with LONG SCREWS (4). Mount ESCUTCHEON SUPPORT (5) to ESCUTCHEON HOLDER (3) with 4 SHORT SCREWS (6).
Figure 3. Align PINS (7) on back side of ESCUTCHEON (8) with the FOUR HOLES (9) in ESCUTCHEON SUPPORT (5) and press ESCUTCHEON (8) flush against finished wall.
1
3
5
Figure 2. | 4 |
|
6
PLSTER | 1 |
GUARD | |
Figure 1. | 2 |
| |
9 |
|
5 |
|
| 7 |
| 8 |
Figure 3. |
|
2 | INSTALL TUB SPOUT, SHOWER HEAD, |
| |||
CAUTION: Protect finish on SHOWER | |||||
SHOWER ARM WITH FLANGE | HEAD and TUB SPOUT when installing. | ||||
|
|
| Remove pipe cap and plug from shower and tub | 2 | |
|
|
| |||
|
|
| |||
|
|
| rough piping. Apply Sealing tape to SHOWER ARM (3) |
|
and tub filler pipe.
Install SPOUT ESCUTCHEON (5) onto SPOUT (1) and thread
SPOUT (1) onto tub nipple. Tighten SPOUT (1) and slide 4
ESCUTCHEON (5) flush agasinst finished wall.
CAUTION: Protect finish on TUB SPOUT (1) when installing.
Install SHOWER ESCUTCHEON (2) onto SHOWER ARM (3). Thread SHOWER ARM (3) into shower elbow and tighten. Slide ESCUTCHEON (2) flush agasinst finished wall.
Thread SHOWER HEAD (4) onto SHOWER ARM (3).
CAUTION: Protect finish on SHOWER HEAD and
ARM when installing.
PIPE
CAP
5
3
SHR.
ELBOW
PIPE
PLUG
1/2" NPT TUB NIPPLE
1
M968592 Rev.1.1