1TRIM INSTALLATION
Place ESCUTCHEON (1) onto ESCUTCHEON HOLDER (2).
Align ESCUTCHEON (1). Thread ESCUTCHEON HOLDER (2) onto DIRVERTER VALVE (3). Tighten until ESCUTCHEON (1) is snug against fiished wall.
2
3
1
2HANDLE INSTALLATION
Install HANDLE ADAPTER (1) onto VALVE STEM (2). Install HANDLE SCREW (3) and tighten.
Align and push HANDLE BASE (4) onto HANDLE ADAPTER (1). Use HEX WRENCH (5) supplied and tighten SET SCREW (6) to secure HANDLE BASE (4).
Thread LEVER HANDLE (7) into HANDLE BASE (4).
4
3
2
1
6
75
3 OPERATING THE VALVE
Turn water supply on and test installed fitting.
Rotate handle to all diverter positions to check operation of valve.
Check for leaks.
OFF
M 9 6 8 9 8 1
