American Standard Triumph Cadet 3 warranty  Triumph Cadet Right Height Elongated Toilet, Tank

 TRIUMPH CADET® 3

RIGHT HEIGHT™ ELONGATED TOILET

VITREOUS CHINA

TRIUMPH CADET® 3

RIGHT HEIGHT™ ELONGATED TOILET

❑2492.016

•Vitreous china

•EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew

•Low-consumption (6.0 Lpf/1.6 gpf)

•16-1/2" rim height for accessible application

•Features the Cadet®3 Flushing System

•Elongated siphon action jetted bowl

•Fully-glazed 2-1/8" trapway with 2" ball pass

•Generous 9" x 8" water surface area

•Close-coupled tank with flat tank cover for superior storage

•Oversized 3" flush valve with chemical resistant flapper

•Chrome trip lever

•Speed Connect™ tank-to-bowl coupling system

•Sanitary dam on bowl with four point

tank stabilization

(30-1/4)

• 2 color-matched bolt caps

768mm

FINISHED WALL

• 100% factory flush tested

25mm ± 6mm

(1 ± 1/4)

(18-9/16)

• 5 year warranty

237mm

❑ 3016.016 Right Height™ Elongated Bowl

(9-5/16)

472mm

❑ 4007.100 Tank

464mm

Nominal Dimensions:

(18-1/4)

C/L OF SEAT POST HOLES

784mm

768 x 472 x 784mm (30-1/4" x 18-9/16" x 30-7/8")

140mm (5-1/2 CENTERS)

SUPPLY

(30-7/8)

Fixture only, seat and supply by others

AS

102mm

REQ'D.

(4)

419mm

Alternate Tank Configurations Available:

(16-1/2)

*203mm

*352mm

❑ 4007.500 Tank complete with Aquaguard Liner

(8)

(13-7/8)

Compliance Certifications -

213mm

356mm

238mm

FINISHED

(9-3/8)

Meets or Exceeds the Following Specifications:

(8-3/8)

(14)

FLOOR

*152mm

• ASME A112.19.2M for Vitreous China Fixtures -

(12)

C/L OF OUTLET

(6)

305mm

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

NOTES:

• Los Angeles Department of Water and Power

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

Supplementary Purchase Specification for

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

Non-Adjustability

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

	IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
	of tolerances established by ANSI Standard A112.19.2.
	These measurements are subject to change or cancellation. No responsibility is
	assumed for use of superseded or voided page
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen		MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
❏ Seat: #5325.010 Elongated Champion® Slow Close		ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
solid plastic seat and cover with easy lift off feature		BUILDING FACILITIES-CHECK LOCAL CODES.
❏ Seat: #5284.016 Elongated EverClean™
anti-microbialsolid plastic seat and cover
❏ Seat: #5311.012 Elongated Laurel molded wood
seat and cover
❏ Supply with stop:

	
© 2007 American Standard Inc.		Revised 08/07