American Standard UL 1795 dimensions Evolution Corner Whirlpool, High Gloss, H100, Revised 2/08

EVOLUTION™ CORNER WHIRLPOOL

HIGH GLOSS

15"

(381mm)

76-3/4"
(1949mm)
OUTLINE OF
CUTOUT
54-1/2"	65-3/8"
(1384mm)
	(1661mm)
10"	3"
(254mm)	(76mm)
7"	17-3/4"
(178mm)	(451mm)

5-5/8" (143mm)

7"

(178mm)

CUT OUT
		13-3/4"
IN FLOOR	(349mm)
FOR DRAIN

65-3/8"

(1661mm)

	C/L OF
19-1/2"(C)	OVERFLOW
(495mm)	21-1/2"(H)
18"(A)	(546mm)
(457mm)
	8"
	(203mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

GENERAL SPECIFICATIONS FOR 6060V WHIRLPOOL

INSTALLED SIZE	76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)
WEIGHT					108 Lbs. (49 Kg.)
WEIGHT w/WATER					824 Lbs. (374 Kg.)
GAL. TO OVERFLOW						86 Gal. (325 L)
WHIRLPOOL MIN. OPERATING VOL.						71 Gal. (269 L)
BATHING WELL AT SUMP		48 x 26-1/2 In. (1219 x 673mm)
BATHING WELL AT RIM				63 x 50 In. (1600 x 1270mm)
WATER DEPTH TO OVERFLOW						15 In. (381mm)
FLOOR LOADING			24 Lbs./Sq.Ft. (116 Kgs./Sq.m)
(PROJECTED AREA)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP	2.1 HP, 14.4 AMPS,120V.
E-Z INSTALL WHIRLPOOL HEATER		12.0 AMPS,120V.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.

▲CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

H100

© 2008 AS America Inc. Revised 2/08