Installation in a Vehicle: Mounting the Antenna

Installation in a Vehicle: Running the Antenna Cable

1.Temporarily plug the antenna into the “1-Sat/Terr (Main)” connector on the back of the cradle until it is firmly seated.

2.Find an antenna location on a metal surface of your vehicle at least 12" x 12", and at least 6" from a window. If you use the included antenna mount (SIR- STRVK1 only), install the mount on the upper portion of your side-view mirror bracket.

•Best reception is achieved with the antenna mounted on the roof or trunk for convertibles.

•If the vehicle has a roof rack or skid ribs, it may be necessary to mount the antenna off-center.

3.The antenna’s powerful magnet will secure it to the metal surface. Before routing the antenna cable, confirm that the antenna is mounted in a good location:

4. Temporarily plug the cigarette lighter adapter into the cigarette lighter.

5. Slide Streamer all the way into the cradle so that the connector at the bottom of the unit makes proper contact in the cradle. Press and hold the POWER button to turn Streamer on.

6. If your Streamer has been properly connected and the antenna is receiving the SIRIUS signal you will hear audio. If you do not hear audio, the display will read “Antenna Error”. Re-orient the antenna until you hear audio. (See Antenna Signal, on page 27 to use the ANTENNA SIGNAL screen to aim the antenna.)

•Make sure the vehicle is not in garage, or somewhere the satellite signal could be blocked.

1.Turn Streamer’s power off and remove it from the cradle; unplug the cigarette lighter adapter from the cigarette lighter; unplug the antenna from the cradle.

2.Route the cable from the antenna to the vehicle’s interior by tucking it underneath the rubber molding around rear window, as shown below.

3.Route the cable from the lowest point of the rear window into the trunk. Take advantage of any existing cable channels or wiring conduits.

•For SUVs, minivans & 5-door vehicles, bring the cable into the vehicle under the rubber molding for the tailgate, and continue under the interior trim.

4.From the trunk, route the cable around the

passenger compartment and to the back of the cradle.

• Do not pull the wire across sharp edges that could damage it.

• Keep the wire away from areas where it could become tangled in driver’s and passenger’s feet.

5.Plug the antenna into the back of cradle where it says “ANT”.

6.Plug the cigarette lighter adapter into the cigarette lighter. THE BRIX GROUP RECOMMENDS UNPLUGGING THE CIGARETTE LIGHTER ADAPTER AFTER YOU TURN THE VEHICLE’S IGNITION OFF.

8

Streamer User Guide

Streamer User Guide

9

Page 4 Page 6
Page 5
Image 5
American Wireless SIR-STRPNP1 manual Streamer User Guide
Page 4 Page 6

SIR-STRPNP1 specifications

The American Wireless SIR-STRPNP1 is a versatile and robust wireless device designed for a myriad of applications across different sectors, such as telecommunications, broadcasting, and even consumer electronics. This device exemplifies the latest technological advancements in wireless communication, offering high performance and reliability in a compact form factor.

One of the main features of the SIR-STRPNP1 is its compatibility with multiple wireless standards, including Wi-Fi, Bluetooth, and Zigbee. This multi-protocol support enables seamless integration into existing ecosystems, making it a go-to choice for developers and engineers. The device is engineered to operate on various frequency bands, ensuring optimal connectivity in diverse environments.

In terms of performance, the SIR-STRPNP1 supports high data transfer rates, making it suitable for data-intensive applications. Its advanced antenna design enhances signal strength and boosts range, thereby minimizing dead spots and providing consistent connectivity. Whether used in a rural area or a bustling urban environment, users can expect dependable performance and minimal interruptions.

The device also incorporates advanced security protocols to safeguard data transmission, critical in today's data-driven world. With features like WPA3 encryption and secure boot capabilities, the SIR-STRPNP1 prioritizes user data safety while ensuring compliance with industry standards.

Another noteworthy characteristic of the SIR-STRPNP1 is its low power consumption. This feature is particularly valuable in battery-operated devices, promoting prolonged usage without frequent recharging. The energy-efficient design does not compromise on performance, making it a sustainable choice for long-term employment.

Moreover, the American Wireless SIR-STRPNP1 is designed for ease of installation and configuration. Users benefit from intuitive setup processes, often requiring minimal technical expertise. The availability of comprehensive documentation further aids users in maximizing the device's potential.

In conclusion, the American Wireless SIR-STRPNP1 stands out in the wireless technology landscape as a feature-rich, reliable, and secure solution. With its multi-protocol support, high performance, energy efficiency, and user-friendly design, it meets the diverse needs of consumers and businesses alike, paving the way for innovative wireless applications in the future.
Top Page Image Contents