Heritage B-15 Bass Amplifier

Flip-Top Instructions:

So you’ve made it this far and you are now ready to flip your lid...or at least the amp. We will instruct you on how to do the latter, as we are not in the business of lid-flipping!

It is accomplished in five simple steps:

Step 1: loosen the latches on each side of the cabinet. There are two latches on each side, four total.

Step 2: using the handle, lift the top of the cabinet (amplifier is attached underneath) and rotate it 180˚.

Step 3: set the cabinet top handle-side down on the top of the cabinet. The amplifier should now be on the top.

Step 4: line up and lock all four latches.

Step 5: connect the amp to the cabinet.

Step 6: connect the power cable to a power source.

Step 7: connect the instrument to the amp.

Step 8: power up the amp.

Step 9: the rest is up to you and the world is your oyster!

Service Information

If you are having a problem with the Heritage B-15, please contact George Metropoulos by email at tech@metroamp.com or by phone at (810) 614-3905.

The Heritage B-15 is covered with sheet metal (amplifier) and a durable fabric-backed vinyl material (cabinet), so be sure to clean with a dry lint-free cloth. Never spray cleaning agents on the Heritage B-15. Avoid abrasive cleansers which would damage the finish.

Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications and information in this manual are subject to change without notice.

“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders and are hereby acknowledged.

www.ampeg.com

©2010 LOUD Technologies Inc.

16220 Wood-Red Road NE • Woodinville, WA 98072

Part No. SW0874 Rev. C 10/10

12