Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
SVT-810E Suggested Hookup Diagrams
In the first example, a speaker cable with 1/4” or Speakon® ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet.
In example number two, a speaker cable with 1/4” ends connects from the speaker output of the amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet. An additional speaker cable with 1/4” ends connects from the speaker output of another amplifier to the speaker input of the Ampeg Heritage SVT-810E cabinet’s 1/4” Upper 4x10 Dual Mode Input Jack. This allows two amplifiers to separately drive each 4x10 section of the full cabinet.
WARNING: Always use good quality (non-shielded) speaker cables. Never use (shielded) instrument cables to connect speakers to an amplifier. Also, do not use both cable routes in the first example listed above. Use one route or the other, but not both!
