Amphony 1500 Tired of wiring your speakers ? Don’t like the cable mess of your audio equipment ?

Tired of wiring your speakers ? Don’t like the cable mess of your audio equipment ?

Or do you want to connect equipment between different rooms without running wires ? Are you afraid of going wireless because of performance trade-offs due to the noise, distortions and low dynamics of 900 MHz analog wireless systems ? Then check out the next generation of 5.8 GHz Digital Audio Transmission products from Amphony.

By transmitting the audio in a digital format, the 5.8 GHz Digital Wireless Audio Transmitter / Receiver from Amphony allow you to eliminate the hassle of wires and give you absolute freedom while maintaing crystal-clear audio quality.

Most importantly, since the 5.8 GHz Digital Wireless Audio Transmitter from Amphony transmits a data rate of over 3 Mbps (3 million bits per second) and since no audio compression is applied, you will experience true CD quality without audio degradation that you are used to from MP3 as well as other audio compression schemes.

Further, an error correction mechanism is employed which is capable of correcting transmission errors to guarantee superior error-free reception even under difficult conditions.

The noise shaping filter which is part of the 5.8 GHz Digital Wireless Audio Receiver from Amphony achieves a higher signal-to-noise ratio compared to conventional digital-to-analog converters by eliminating quantization noise from the audible frequency band.

The wireless receiver connects to any passive speakers or audio amplifier. By receiving the audio signal at 5.8 Ghz, the receiver is fully immune to interference from 2.4 GHz devices.