Amphony 1520 manual

Tired of wiring your speakers ? Don’t like the look of long speaker cables of your home theater system ? Are you afraid of going wireless because of the low audio quality of

900 MHz analog wireless systems or possible interference from other wireless devices ? Then check out the next generation of 5.8 GHz Digital Audio Transmitter / Amplifier products from Amphony.

By transmitting the audio in a digital format at 5.8 GHz, the Digital Wireless Audio Transmitter / Amplifier from Amphony allows you to eliminate the hassle of wires and is fully immune to interference from 2.4 GHz wireless devices.

Most importantly, since the 5.8 GHz Digital Wireless Audio Transmitter from Amphony transmits a data rate of over 3 Mbps (3 million bits per second) and since no audio compression is applied, you will experience true CD quality without audio degradation which you are used to from MP3 as well as other audio compression schemes.

Further, an error correction mechanism is employed which is capable of correcting transmission errors to guarantee superior error-free reception even under difficult conditions.

To minimize heat and size, the Model 1520 includes a stereo digital class-T amplifier that provides the power efficiency of traditional class-D digital amplifiers at a far lower audio distortion. Each wireless amplifier only measures 5 x 3.5 x 2 inches and is easily mountable to a speaker.

The noise shaping filter which is part of the wireless amplifier from Amphony achieves a higher signal-to-noise ratio compared to conventional digital-to-analog converters by eliminating quantization noise from the audible frequency band.