Getting to Know the Rear Panel
AAudio Inputs
Use the INPUT jacks to connect to the outputs of a preamplifier, receiver with preout connections, CD player, or other control devices.
BInput Gain Controls
Use these to adjust the input gain of each channel.
CProduct Serial Number
Write this number in the space provided on page 10 for future reference.
DRemote Trigger Input
Use the REMOTE TRIGGER jack to connect to a compatible preamplifier, source device, or other product with a
EMaster Power Switch
Turns the current to the amplifier on or off.
A
FAC Fuse
Your amplifier is supplied with a rear panel mounted main AC fuse. This main fuse may need replacement if the unit will not turn on. Never replace the the main fuse with other than the one indicated.
WARNING: Always turn off the amplifier and unplug the power cord before making any electrical connections.
GAC Input
Use the included power cord to connect your amplifier to an AC power source.
HSpeaker Outputs
Use the OUTPUT binding posts to connect the amplifier to your speakers; red for positive, black for negative.
NOTE: The picture below is an AT1202. The AT602 is virtually identical in appearance.
B
C | D | E | F | G | H |
Page 4
