Amplifier Tech SUM100 manual Performance Specifications

PERFORMANCE SPECIFICATIONS

Gain:	28dB maximum, 0dB at 12 o’clock pot position
Nominal Levels:	+4dBu in, +4dBm out to 600 ohm balanced load
Peak Levels:	+24dBu in, +22 dBm out to 600 ohm balanced load
Noise 20kHz B.W.:	-90dBm maximum output
Harmonic Dist.:	.02% Max at Peak Level
	20Hz to 20 kHz .005% max at Nominal Level
Frequency Resp.:	+.25dB, 20 to 20,000Hz
Crosstalk:	70dB minimum at 10kHz
Input Impedance:	Balanced, 40kohm bridging
Output Impedance:	Balanced, 40 ohms maximum Zs
Dimensions:	1.5"H by 5.5"W by 5.75"D; Weight: 1.5 Lb. Net
Connectors:	XLR (balanced input/outputs)
Power:	24VDC @ .07A, connector sleeve is positive
Power Supplies:	All units require 24VDC power supply, which is ordered separately.
	Nanoamps can share a single supply-using loop thru DC cable (P/N 20602-1).
	Do not exceed rated supply current
WA100-1:	Wall mount power supply (UL), 24VDC @ .4 amp, 115 VAC/60 Hz
WA100-2:	Tabletop power supply, 24VDC @ .4 amp, 230 VAC/50-60 Hz with IEC 320
	male 3 pin AC input connector. User supplies matching AC line cord for local
	power system
BBU100-1:	Battery Pack unit houses four 9V alkaline batteries (batteries not included).
	Four-to-six-hour life
DC100-1:	DC to DC converter powers several units from 12VDC mobile and belt pack
	batteries. Supplies 24VDC @ .2amp maximum
20602-1:	DC power cable assembly for looping the DC power between NanoAmps
DESK MOUNT KITS:	20617-501 Angled Desk Mount Base
	20617-502 Angled Desk Mount Base and One Stacker (2 units high)
	20617-503 Angled Desk Mount Base and Two Stackers (3 units high)
	20617-504 Stacker (2 units high)
	20617-505 Horizontal joiners for 2 units (side by side)
21075-501:	Rack mount system mounts three units in one rack

Audio Technologies Inc. 154 Cooper Road #902 West Berlin, NJ 08091 Voice 856-719-9900 Fax 856-719-9903 www.audio.com