32
Resetting to Factory Default Settings
To reset the printer to factory default settings:
1. Turn off the printer.
2. Press and hold the CANCEL button and turn on the printer.
3. When “E2PROM RESET …” is displayed on the LCD and the READY
indicator blinks, release the CANCEL button.
NOTE: Printers with Ethernet will take 20 second for this process, the
PAUSE button must be pressed during that period.
4. When “READY” is displayed on the LCD, the READY indicator stops
blinking but remains illuminated.
5. When the two indicators relight, release the feed button.
6. The following information is printed in the report:
Label parameters
Heat (Darkness)
Speed
Symbol set (language)
Others for specific emulation
Notes:
1. All settings stored in FLASH memory are retained even after turning off
the printer.
2. You must perform the calibration for label sensitivity after you reset.
3. Printed label count is not reset.