Installation Guide
Solecis AVB-DA-RGBHV-0106
Overview
The Solecis
The high performance wide bandwidth circuitry ensures compatibility across all resolutions and the
The
(front)
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment.
Power Source
Use only a
Power Cord
Use only the cord shipped with the unit. Do not use the cord if it has become damaged or frayed. Contact your AMX Solecis dealer if you need to replace the power cord.
Grounding
The interface is grounded through the grounding conductor on the power cord. To avoid electric shock plug the power cord into a properly wired receptacle. Do not defeat the purpose of the
|
| Fuse |
|
| For protection against the risk of fire, use only a fuse of the same rating and type. |
|
| Liquid Spills |
|
| Do not set drinks on top of the unit or immerse the unit in liquid. |
| (rear) | Do Not Disassemble |
| This device contains no user serviceable parts. All servicing must be performed by a | |
|
| |
FIG. 1 Solecis |
| qualified service technician. |
Product Specifications
RGB Input
Number: | 1 |
|
|
Connector: | BNC |
|
|
Level: | Analog |
|
|
Max Level: | 1V |
|
|
Impedance: | 75 ohm |
|
|
Sync Input |
|
|
|
Type: | Analog or TTL |
|
|
Impedance: | 75 ohm |
|
|
RGB Video Bandwidth: | 350MHz |
|
|
RGB Return Loss: | |
|
|
Adjacent Channel | |
|
|
RGB Output |
|
|
|
Number: | 6 |
|
|
Connectors: | BNC |
|
|
Level: | Analog |
|
|
Gain: | Unity |
|
|
Impedance: | 75 ohm |
|
|
Sync Output |
|
|
|
Level: | TTL |
|
|
Impedance: | 75 ohm |
|
|
Power |
|
|
|
Input Voltage: | |
|
|
Power Consumption: | 8W |
|
|
Dimensions (HWD): | 1.73” x 17.36” x 6.69” (4.4cm x 44.1cm x 17.0cm) |
|
|
Weight: | 5.73 lbs. (2.6kg) |
|
|
Certifications: | • CE |
| • UL60950 |
| • FCC class B, part 15 |
| • RoHS/WEEE compliant |
|
|
•Do not place the unit on an unstable surface.
•Do not use near water or sources of heat.
•Use only recommended attachments.
•Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the following conditions:
•If liquid has been spilled or the unit has been exposed to rain or water.
•If it does not operate normally when the operating instructions are followed or if it exhibits a distinct change in performance indicating a need for service.
•If the unit has been dropped or the cabinet damaged.
Connections
Connect the PC input and outputs on the rear panel of the unit.
Note: It is imperative that the input source is fully compatible with the display devices.
The RGB input is 75 ohm terminated and the outputs fully 75 ohm driven for connection to long cable runs.
The unit can now be connected to the mains and the power switched on.