802.11g wireless access point
DIMENSIONS (HWD)
•Antenna fully lowered: 1.34" x 5.04" x 4.29" (34mm x 128mm x 109mm)
•Antenna fully raised: 3.94" x 5.04" x 4.29" (100mm x 128mm x 109mm)
WEIGHT
• 0.53lbs (0.24kg)
POWER
• 5.4V
RADIO SPECIFICATIONS
•WLAN standards:
-IEEE 802.11/11b Industry standards
-IEEE 802.11g draft standards
•Media Access Protocal
-IEEE 802.11
•Frequency
-2.4 - 2.4835 GHz (Industrial Scientific Medical Band)
•Operating Channels
-11b Mode:
11 Channels (USA, Canada)
13 Channels (Europe)
14 Channels (Japan)
- 11g Mode:
11 Channels (USA, Canada)
13 Channels (Europe, Japan)
•Data Rate Shifting
-1, 2, 5.5, 6, 9, 11, 12, 24, 36, 48, 54 Mbps
•Modulation Technique
-CCK for 11b mode (1, 2, 5.5, 11 Mbps)
-OFDM for 11g mode (6, 9, 12, 24, 36, 48, 54 Mbps)
•Security
-
-
-802.1x Pass Through
•Outdoor Power
-15 dBm @ 11M CCK
-10 dBm @ 54M OFDM
•Coverage Area
-Indoor: 100ft (30.5m)
-Outdoor: 1000ft (305m)
FIRMWARE/SOFTWARE SPECIFICATIONS
•Management/Configuration
-
•Firmware Upgrade
-TFTP
•IP Connection
-Static IP or DHCP client
•Protocols
-Transparent to layer 3 protocols, such as PPoE and VPN
FRONT COMPONENTS
•LEDs
-Three blue activity and status LED indicators Power - Indicates power is on
WLAN - Indicates wireless network activity LAN - Indicates wired LAN activity
REAR COMPONENTS
•Power Connector
-AC Adapter connects to a 1.5A @ 5.4VDC external power adapter
-Power Over Ethernet (PoE) powers the device through the CAT5 cable. Both Power and Data can be transmitted simultaneous through the CAT5 cable.
•Reset Button
-Pressing this button restores the settings to their factory values: administrator password, IP address, and other configurations. This button is also helpful if you cannot access the configuration utility.
-Note: Resetting the WAP will erase all your settings (WEP Encryption, Wireless and LAN settings, Passwords, etc.) and restore them to their factory default values. Do not reset the WAP if you want to retain these settings.
•LAN Port
The
-LAN - PC toggle switch
-When configured as a Wireless Access Point it allows multiple computers to connect to the LAN wirelessly
-When configured as a Bridge is allows devices with a 10/100 port, to be connected to the wireless LAN,
such devices include desktop computers, printers, XBoxes, PlayStation2s, PVRs, Stereos, etc.
-When the
Access Point the switch should be positioned to LAN
-When it is used as a Bridge it should be positioned to PC
•Antenna Connector
-Single 3 dBi external antenna with reversed SMA connector
ENVIRONMENTAL SPECIFICATION
•Operating Temperature: 0ªC (32ªF) to 50ªC (122ªF)
•Storage Temperature
•Relative Humidity: 10% to 90%
CERTIFICATIONS
•FCC, IC, CE, TELEC
•
INCLUDED ACCESSORIES
•One power supply
•Five international plug adapters
OPTIONAL ACCESSORIES
•
•
•
•
•
•
•
•
•
•
Extension Cable
rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.
ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN
LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA • | SINGAPORE • SPAIN • SWITZERLAND | • THAILAND • TURKEY • USA |
ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX • | PORTLAND • SPOKANE • TAMPA | |
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800 . 222 . 0193 • 469 . 624 . 8000 • +1 | . 469 . 624 . 7400 • 469 . 624 . 7153 fax • www. amx . com | |
© 2006 AMX. All
