Installation Guide
RDA-ENC6B and ENC12B Dimmer Enclosures w/Breakers
The
TOP VIEW |
|
|
| 0.75" | ||||
|
|
|
|
|
| (19.05 mm) | ||
|
|
|
|
|
| |||
|
|
| 6.0" | |||||
(152.4 mm)
These enclosures are CE, UL, and
They also provide 18 knockouts for 1/2", 3/4", and 1" conduits.
RDA-ENC6B Configurations:
-ENC6B/120 20 A Breakers
-ENC6B/240 10 A Breakers
|
| |
SIDE VIEW |
| - ENC12B/120 20 A Breakers |
| - ENC12B/240 10 A Breakers | |
|
|
|
|
|
|
|
|
|
|
|
| RDK Configurations: |
|
|
|
|
|
|
|
|
|
| - |
|
|
|
|
|
|
|
|
|
| - |
|
|
|
|
|
|
|
|
|
|
|
24.0" |
|
| ||||||||
24.0" |
|
| ||||||||
(610 mm) | (610 mm) |
|
| |||||||
| ||||||||||
|
|
|
|
|
|
|
| Sample | ||
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| shown with 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
18.0" (457.2 mm)
Top, side, and bottom views are the same for both enclosures.
BOTTOM VIEW
Note:
LINE INPUTS: 120 A MAX PER TERMINAL Use 75° C copper conductors only.
Torque terminals to 44
FIG. 1 Top, front, bottom, and side views of the
Installation Instructions:
•For indoor use only.
•Mount on vertical surface only.
•Maintain 12" (304.88 mm) minimum clearance above and below the enclo- sure.
•Route class 1 conductors through upper conduit knockouts.
•Route class 2 conductors through lower conduit knockouts.
•Use 75°C (167°F) copper conductors only.
•Install filler plate
•Install only UL approved modules (see the UL Number Cross Reference to AMX Lighting ID table on page 2).
Enclosure Weights:
•
•
Dimensions between center lines (from FIG. 2):
•A to B = 16.0" (406.4 mm)
•B to C = 22.88" (581.2 mm)
•A to B = 16.0" (406.4 mm)
•B to C = 22.88" (581.2 mm)
Radia enclosures must be mounted on a vertical surface with a minimum of 12" (304.8 mm) clearance above and below the enclosure.
Configuration for |
| |
right and left | A to B | |
mounting brackets | ||
| ||
for all Radia | Top slot | |
enclosures. | ||
| ||
| B to C | |
Maximum mounting |
| |
screw size: #12 |
| |
| Bottom slot |
FIG. 2 Bracket configuration
Specifications
•Maximum input wire #1/0 AWG (50mm²)
•Maximum line input is 120 A (per terminal)
•Torque input wire to 44
•Wire stripping length: 0.67 inches (17 mm)
•Input 1 feeds channels 1, 4, 7, and 10
•Input 2a feeds channels 5 and 11
•Input 2b feeds channels 2 and 8
•Input 3 feeds channels 3, 6, 9, and 12
•Breakers are UL 489 listed 10,000 AIC, 100% Switching Duty,
The following section cross references the UL ID module numbers and AMX Lighting module IDs.
The modules identified are the only ones that can be used in the
