8AXCESS Programming TX-MLCD Mini-LCD Transmitter
Sample Program

Figure 5 is a sample demo AXCESS software program for a TX-MLCD.

Refer to the AXCESS Language Programming Guide for complete

programming instructions.

PROGRAM_NAME='TXMLCD 6 BUTTON DEMO PROGRAM, RSH 04-29-91'
(* DATE:04/28/92 TIME:16:53:22 *)
(*
THIS IS A GENERIC PROGRAM THAT CREATES 6 VARIABLE FUNCTION
BUTTONS
BUTTONS DENOTED WITH A * BELOW. THE REMAINING THREE ROWS ARE
USED
FOR MENU SELECTIONS.
BUTTON NUMBERING:
1* 6* 11* 16*
2* 7 12 17*
3 8 13 18
4 9 14 19
5 10 15 20
BUTTONS 7 AND 12 ARE NOT USED IN THIS PROGRAM.
FUNCTION BUTTONS GIVE FEEDBACK 'WINK', A DASHED LINE, THAT
REPLACES
THE FUNCTION TEXT AND THEN RESTORES IT ON RELEASE OF THE BUTTON.
THE 12 MENU SELECTION BUTTONS TRANSMIT RADIO CODES 1-12 AND
OFFSET
THE RADIO CODES THAT THE FUNCTION BUTTONS WILL THEN TRANSMIT.
FOR EXAMPLE, IF MENU SELECTION 1 IS PRESSED THEN FUNCTIONS 1-6 WILL
TRANSMIT RADIO CODES 32-37 AND IF MENU SELECTION 2 IS PRESSED
THEN FUNCTIONS 1-6 WILL TRANSMIT RADIO CODES 40-45 AND SO ON.
*)
(***********************************************************)
(* DEVICE NUMBER DEFINITIONS GO BELOW *)
(***********************************************************)
DEFINE_DEVICE
MLCD = 1 (* TX MLCD IS ALWAYS DEVICE 1 *)
(***********************************************************)
(* CONSTANT DEFINITIONS GO BELOW *)
(***********************************************************)
DEFINE_CONSTANT
(***********************************************************)
(* VARIABLE DEFINITIONS GO BELOW *)
(***********************************************************)
Figure 5
Sample AXCESS software
program