Antari Fog Cooler
Congratulations on the purchase of your new
ANTARI FOG COOLER
Introduction
Thank you for choosing the ANTARI Fog Cooler. You now own a rugged and powerful
Please follow these operation, safety and maintenance instructions
to ensure a long and safe life for your fog cooler.
Pay attention to all warning labels and instructions printed on the exterior of your
ANTARI Fog Cooler
♦Ideal operating temperature is 10 - 30 degrees Celsius.
♦After moving or transporting this unit, wait five minutes before operating.
♦Input fog must be clean. Contaminated fog may damage internal parts.
♦There must be a free air space of at least 15 cm (6 inches) between the fog cooler intake and the fog machine output.
♦After interrupting operation, wait three minutes before starting again.
♦Keep this device dry.
♦For inside use only. Not designed for outside use.
♦For the 110V models, use
♦Keep fog cooler upright. Do not tilt this device. Angle of inclination may not exceed 10 degrees.
♦Turn off or unplug when not in use.
♦This machine is not water- or
♦No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.
♦For adult use only. Fog cooler must be installed out of the reach of children. Never leave the unit running unattended.
♦Locate the fog cooler in a
♦Use only ANTARI FLR Fog Liquid.
♦If your ANTARI Fog Cooler fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material) and return it to your ANTARI dealer for service.
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact. Refer to the ”Features” section for information on what
2