7.Connect the 24-pin Main Power Connector (Illustration 2). If the mother- board uses a 20-pin connector, detach the 4-pin attachment on the 24-pin power connector (see pictures 1 and 2).

Note: the detachable 4-pin section cannot be used

Picture 1

Picture 2

in place of a 4-pin +12V connector.

 

 

d

 

For 24-pin

For 20-pin

motherboards

motherboards

8.Connect the 4-pin (Illustration 3) 12V connector to the motherboard as needed.

3

9.If your video card requires a PCI-E Connector, then connect the cable from the main wire bundle to your video card.

10.Connect the Drives and Accessories Cable to devices such as hard drives, optical drives, fans, etc.

11.Connect the SATA cable if you are using a Serial ATA hard drives.

12.Close your computer case.

2

Page 3
Image 3
Antec BP430 user manual Place of a 4-pin +12V connector

BP430 specifications

The Antec BP430 is a reliable power supply unit designed to meet the demands of modern PC systems. Known for its balance of performance, efficiency, and durability, this power supply has become a preferred choice for gaming and general-purpose desktops alike.

One of the main features of the Antec BP430 is its 80 PLUS Bronze certification, which signifies a robust level of energy efficiency. This certification means that the unit operates at a minimum of 82% efficiency at typical loads, which translates to lower energy consumption and reduced electricity bills. The BP430 is particularly noteworthy for its ability to maintain high efficiency even at lower loads, making it an ideal option for users who may not constantly run resource-intensive applications.

In terms of wattage, the BP430 outputs 430 watts, which is sufficient for most mid-range systems. This makes it suitable for users who want to build a budget-friendly gaming rig or a capable workstation without compromising on performance. The power supply supports various components, including up to two graphics cards, which adds to its versatility in diverse configurations.

The BP430 is equipped with multiple protection mechanisms to safeguard your system. These include over-voltage protection, under-voltage protection, short-circuit protection, and overload protection. Such features ensure that your valuable components are shielded from potential damage due to power surges or faults.

Cooling is another critical aspect of the Antec BP430. It features a quiet, thermally controlled 120mm fan that helps to maintain optimal operating temperatures. This fan adjusts its speed according to the load, allowing for efficient cooling while minimizing noise, which is especially important in gaming setups or silent PC builds.

The design of the BP430 is also user-friendly. With a standard ATX form factor, it easily fits into most cases and provides a selection of connectors, including multiple SATA and Molex connectors, allowing for extensive storage options.

In conclusion, the Antec BP430 is a well-rounded power supply that excels in efficiency, safety, and compatibility. Its combination of features makes it a solid choice for anyone looking to power their computer reliably, whether for gaming, work, or everyday tasks. With its emphasis on performance and user protection, the BP430 stands out as a dependable foundation for any PC build.