![](/images/backgrounds/20632/20632-8663x1.png)
7.SETUP MENU continued …
7.4.6 ADJUST INPUT LEVELS
For Sources set to
6.ADJUST INPUT LEVELS
Adjustment only applies when
a.CD : +0.0 dB
b.
c.
d.TAPE : +0.0 dB
e.FM/AM :
f.DVD : +0.0 dB
g.TV : +0.0 dB
h.SAT : +0.0 dB
i.VCR : +0.0 dB
j.AUX : +0.0 dB
If a source that is set to
Before making changes or adjustments in this menu, have all connected source components playing similar music material. Then, as you switch through each highlighted Source, you will hear that component play. This lets you know that each component is connected to the AVM 30, and it also allows for easy comparative level adjustments of analog sources. Remember, adjusting input levels only functions with Sources set to Analog in menu 5, and the bar graph only works with
Example: Adjust TAPE Input Level.
•Make sure a source component is connected to TAPE Analog L/R Input and playing.
•Enter the Setup (section 7.1). Go to ‘6. ADJUST INPUT LEVELS’ and press SELECT.
•Press the button until you reach ‘d. TAPE: +0.0 dB’.
•Press SELECT. ‘+0.0 dB’ will be highlighted in red.
•Use the buttons to change the Level.
•When finished, press BACK and then to go to another Source, or...
•Press BACK to leave the submenu and return to the main menu.
56