![](/images/new-backgrounds/1263718/26371811x1.webp)
INSTALLATION INSTRUCTIONS
SWIVEL BASE
InstallRemove
Figure 1 Installing and Removing the Swivel Base
POWERCORD
Power Source:
1.Make sure that the power cord is the correct type required in your area.
2.This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3.Connect the power cord into your LCD monitor’s power input socket, and then plug the other end into a
NOTES
A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation
| 5 |