9
The “Reset To Default” is user-defined and is only used to reset the red,
green, blue back to the default value.
4. Reset To Default is used to reset all settings to default value.
Note: All the “Reset To Default” functions are the same except those in
menus set by the user, which can reset all settings to default value in all
menus.
SOUND Setup
1. Volume is adjusted from 0 to 100.
2. Bass and Treble are adjusted from 0 to 100.
You can adjust picture Volume, Bass and Treble to the levels you prefer.
3. The adjustment range of balance is from 0 to 100.
0 to 50 is used to adjust the volume of right speaker from low to loud.
50 to 100 is used to adjust the volume of left speaker from loud to low.
4. The Mute is “ON” or “OFF”,and if the Mute is ON,there are no sound
output