9.3 Factory mode adjustment
After replacing the Main board and the Panel, Check for enter the Factory mode ,then re-writing DDC is necessary. Step:
Press MENU button and hold,reinsert the Power cord , then ,press MENU , the monitor will may enter Factory OSD
Menu. Then Press . Factory OSD Menu will appear in the screen.
44
Service Manual | AOCe941series |
Key Board---OSD no working
OSD is unstable or not
working
Is Key Pad Board connecting
normally?
OK
Is Button Switch normally?
OK
Is Key Pad Board normally?
OK
NG
NG
NG
Check flow chart For the key board
Connect Key Pad Board
Replace Button Switch
Replace Key Pad Board
Check Main Board
