Power | AOC i2353 manual

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for monitors with power adapter).

Manufacturers:

1) TPV ELECTRONICS(FUJIAN) CO., LTD model : ADPC1245

5

Image 5

AOC i2353 manual Power

Contents

Page Power SafetyInstallation Cleaning Warranty Statement for North & South America excluding Brazil ServiceWarranty Statement for Europe National Conventions Safety Power Installation Cleaning Other Contents in Box SetupPower Cable Analog Cable HDMI Cable Adaptor Setup Stand & Base Adjusting Viewing Angle 1 2 3 4 Connecting the Monitor Wall Mounting Setting Optimal Resolution AdjustingWindows Vista 1 Click START 6 Set the resolution SLIDE-BAR to 1920 by 5 Click Display Settings 2 Click SETTINGS 3 Click CONTROL PANEL 4 Click Appearance and Themes Windows XPFor Windows XP 5 Double click DISPLAY 4 Double click DISPLAY Windows ME/20007 Set the resolution SLIDE-BAR to 1920 by Power HotkeysVolume Auto/Source/Exit Clear Vision Basic and simple instruction on the control keys OSD Setting Press Menu to display menu LuminancePress or to select Luminance, and press to enter Press or to select submenu, and press to enter Backlight Adjustment Press or to adjustAdjust to Gamma1 Adjust to Gamma Press or to select Image Setup, and press to enter Image Setup Phase Adjust picture Clock to reduce Vertical-Line noiseAdjust Picture Phase to reduce Horizontal-Line noise Adjust picture sharpness Press or to select Color Setup, and press to enter Color Setup Disable or Enable Full Enhance Mode Color setupDisable or Enable Nature Skin Mode Disable or Enable Green Field Mode Press or to select Picture Boost, and press to enter Picture Boost Adjust Frame Brightness Adjust Frame SizeAdjust Frame Contrast Adjust Frame horizontal Position Press or to select OSD Setup, and press to enter OSD Setup Adjust the vertical position of OSD Adjust the horizontal position ofTimeout Adjust the OSD Timeout Press or to select Extra, and press to enter Extra HDMI 1/HDMI Exit LED Indicator Monitor Driver DriverWindows 1.Start Windows 6.Click the “Monitor” tab and then click the “Properties” button 4.Ckick on the “Change display settings” button5.Click the “Advanced Settings” button 9. Select Let me pick from a list of device drivers on my computer 7.Click the “Driver” tab 13. Close all open windows and remove the CD 3. Click Advanced Settings 2. Click Personalization and then Display Settings 8. Select your monitor model and click on the Next button 5. Click Update Driver... in the Driver tab 2. Click on the Start button and then click on Control Panel 1. Start Windows XP3. Select and click on the category ‘Appearance and Themes’ 4. Click on the Display Item 7. Click on the Driver tab and then click on Update Driver... button 5. Select the Settings tab then click on the Advanced button6. Select Monitor tab If the Properties button is active, click on Properties button 13. Click on the Finish button then the Close button 11. Click on the Open button, then click the OK button12. Select your monitor model and click on the Next button Windows ME i-Menu e-Saver Screen+ Problem & Question TroubleshootPower LED Is Not ON Ghosting Shadowing Problem Monitor Is Stuck In Active General Specification Specification RESOLUTION Preset Display ModesSTAND HORIZONTAL Pin No Pin AssignmentsSignal Name Plug & Play DDC2B Feature Plug and Play FCC Notice Regulation WEEE Declaration Warranty Statement for Europe Service Information in this document is subject to change without notice Warranty Statement for North & South America excluding Brazil ARGENTINA http//ar.aoc.com/support/findservicecenter USA http//us.aoc.com/support/findservicecenterCHILE http//cl.aoc.com/support/findservicecenter COLOMBIA http//co.aoc.com/support/findservicecenter