General Information

Safety information

Read and save this manual. This manual contains important safety instructions for the proper installation and use of this product.

Warning Disconnect power to the enclosure before installing the Rack Side Air

Distribution Unit. Failure to do so may result in personal injury or damage to equipment.

Do not apply power to the unit until the installation is complete. The Rack Side Air Distribution Unit contains moving parts, which are potentially hazardous when operated outside of the enclosure.

Keep fingers and clothing away from the fans. When power is applied, they have moving parts which can cause personal injury.

Do not attempt to move a heavily loaded enclosure by yourself. Doing so introduces risk of injury due to muscle strain or the tipping of the enclosure. Fully loaded enclosures require at least two people to move safely.

Check that the power cord plugs and sockets are in good condition before installation.

Connect the Rack Side Air Distribution Unit to a IEC-320-C13 outlet. Connection to any other type of outlet may result in a shock hazard. Each outlet must be connected to appropriate branch circuit/mains protection (fuse or circuit breaker).

This equipment contains hazardous voltages. Do not attempt to disassemble or modify the unit.

Always install and operate the Rack Side Air Distribution Unit as shown in this manual.

2

Rack Side Air Distribution Unit

Page 5
Image 5
APC ACF202BLK quick start Safety information