How to install and remove caged nuts
To install a caged nut:
Install the caged nut horizontally. Do not install the caged nut
vertically with the sides of the caged nut engaging the top and
Warning bottom of the square hole.
1. Insert the caged nut into the square hole by hooking one side of the caged nut assembly through the far side of the hole.
2. Place the caged nut tool (provided) on the other side of the caged nut and pull to snap it into position.
To remove a caged nut:
1.Remove any attached screw.
2.Grasp the caged nut and squeeze the sides to release it from the square hole.
Cable Management | 3 |
