In addition to Microsoft and MAC OS, Disk On-line Server also supports Unix-
based systems such as IBM AIX, HP-UX, Sun Solaris, Linux, Free BSD, etc.
through the NFS service:
Note: Configure NFS settings in User Management page for users who use this
feature before proceeding to the steps below.
1. On Unix, run the command:
mount -t nfs <Disk On-line Server IP address>:/<Network Share Name>
<Directory to Mount>
For example, if your Disk On-line server’s IP address is 192.168.0.1 and you
want to link the network share folder “public” under the /mnt/pub directory,
use the following command.
mount -t nfs 192.168.0.1:/public /mnt/pub
Note: You must login as “root” user to initiate the above command.
2. Login as the user id that you define, you can use the mounted directory to
access your network share files.
To use Novell Netware service, enable this option and enter the server name for
Netware network. The server will then operate in a manner similar to a Novell
NetWare 3.12 file server.
Other than OS support, your Disk On-line Server also provides a convenient web
file management interface that allows using a standard web browser to access
your data. If you link Disk On-line Server to the Internet and use a public IP
address, you can access the files on the server anywhere. For more information,
please refer to Appendix B.
69