NetBotz® Vibration Sensor (NBES0306) Installation Instructions
Inventory
fastener (1) |
|
Vibration sensor with
cable (1)
Adhesive cable tie holder (5) |
Installation
Caution: Make sure you connect this sensor to a Sensor port on applicable NetBotz products. See your NetBotz product documentation for details.
Note: The typical location for the vibration sensor is on a main support in the top half of the enclosure. Avoid installing the sensor near a cooling unit, which could cause the sensor to give false alarms.
Note: You can extend the length of the sensor cable up to 30.5 m (100 ft) using the
Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2008 American Power Conversion. All rights reserved. All APC trademarks are property of American Power Conversion. Other trademarks are property of their respective owners.