Very Important

FAILURE TO READ AND FOLLOW THESE INSTRUCTIONS BEFORE YOU PROCEED MAY RESULT IN ENGINE DAMAGE AND THE VOIDING OF YOUR WARRANTY!

Introduction

Congratulations on purchasing a Zenoah® engine. Cared for properly, these high-quality, finely crafted engines will offer many years of reliability.

This instruction manual has been developed to ensure optimum performance from the Zenoah engine you have purchased. It’s important that the instructions are read thoroughly prior to mounting and running the engine.

Safety Instructions

This manual describes the engine’s features and func- tions. For specific information on mounting, see the instruction manual included with the model airplane, heli- copter or boat in which you intend to install the engine.

This model engine will give you considerable pleasure, satisfaction and performance if you strictly follow these safety instructions and take heed of the warnings as to the engine’s safe and proper use. This engine has more than enough power to cause harm if misused or if the safety precautions are not observed.

Always

1.Use genuine parts for replacement.

2.Check the propeller, rotor (helicopter) or screw propeller (boat) prior to each time the engine is used. If nicked, scratched, cracked or damaged in any way, replace it with a new one.

3.Use the correct size and pitch of propeller for your engine; refer to the propeller chart in this manual.

4.It is extremely important to balance the propeller prior to installation of the engine. Failure to do so may cause damage to the Zenoah engine and/or the airframe. Securely tighten the propeller nut against the washer and propeller.

5.Inspect the tightness of the propeller nut prior to each flight.

6.Keep your face and body away from the path of the propeller blades when starting or running your engine.

7.Use a thickly padded glove when hand starting the engine.

8.Make all carburetor adjustments from behind the propeller.

9.To stop the engine, the black lead wire from the

coil should be grounded to the engine body, or use the throttle linkage to shut off the air by closing the throttle valve completely.

DO NOT USE HANDS, FINGERS OR ANY OTHER PART OF THE BODY TO STOP THE PROPELLER. DO NOT THROW ANY OBJECT INTO A PROPELLER TO STOP IT!

10.Ensure that all spectators, especially children, are at least 20 feet away when you start running the engine.

11.Make sure your fuel is kept in a safe place well away from sparks, heat or anything that could ignite the fuel.

Recommendations

1.Use safety glasses or goggles when starting and running your engine.

2.Do not run the engine in the vicinity of loose gravel or sand. The propeller may throw such materials into your eyes. The engine could also ingest these harmful materials.

3.Avoid loose clothing when operating your model engine, as it could become entangled in the propeller, creating the possibility of bodily harm. All loose objects (screwdrivers, pencils, nickel cadmium glow drivers, etc.) should be removed from your pockets so that they do not fall into the propeller.

3

Page 2 Page 4
Page 3
Image 3
APC Zenoah instruction manual Very Important, Introduction, Safety Instructions, Always, Recommendations
Page 2 Page 4

Zenoah specifications

APC Zenoah is an innovative and cutting-edge technology brand recognized for its premium quality products designed for various applications, including outdoor power equipment and industrial engines. With a strong focus on enhancing performance and durability, APC Zenoah has established a reputation for reliability among professionals and hobbyists alike.

One of the main features of APC Zenoah products is their powerful engine technology. Equipped with advanced two-stroke and four-stroke engines, these devices deliver impressive torque and efficiency. The engines undergo rigorous testing to ensure optimal performance across a range of operating conditions, making them suitable for heavy-duty tasks. The fuel efficiency of APC Zenoah engines significantly reduces operating costs, while the high power output meets the demands of commercial and recreational users.

The lightweight design of APC Zenoah products is another important characteristic. By utilizing high-quality materials such as aluminum and composite plastics, these tools and equipment remain easy to handle without compromising on strength or durability. The ergonomic design further enhances user comfort, allowing for extended periods of operation without fatigue. This attention to user experience sets APC Zenoah apart from competitors.

APC Zenoah also incorporates innovative technologies such as vibration dampening and low noise emissions. These features are crucial for reducing operator fatigue and ensuring compliance with environmental regulations. The vibration-dampening systems effectively minimize the impact of engine vibrations on the operator, making it safer and more comfortable to handle the equipment. Meanwhile, the low noise emissions technology ensures that users can operate their tools without causing undue disturbance to the surrounding environment.

The brand also emphasizes versatility in its product line, offering a range of tools suitable for diverse applications. From chainsaws and brush cutters to leaf blowers and trimmers, APC Zenoah products are designed to meet the specific needs of various users, whether in landscaping, forestry, or agriculture.

In conclusion, APC Zenoah stands out in the market with its commitment to performance, durability, and user-friendly design. By combining advanced engineering with innovative technologies, the brand continues to set industry standards, making its products a top choice for professionals and enthusiasts who demand excellence in outdoor power equipment.
Top Page Image Contents