OPERATION

GENERAL INFORMATION

1.1SCOPE

This section provides detailed operating instructions for the Apollo SL15-CD Audio Control Panel with the integrated CD15 Remote Compact Disc player. Please read it carefully before using the equipment so that you can take full advantage of its capabilities.

This chapter is divided into five sections covering the basic operating areas. They are Audio Selector, Transceiver Selection, Intercom, CD operation and Marker Beacon Receiver.

Apollo SL15-CD controls

1.2Power Switch (EMG-Fail Safe Operation)

Unit power is turned on and off by pushing the volume knob. In the OFF or

"EMG" position, the pilot is connected directly to Com 1. This allows communication capability regardless of unit condition. Any time power is removed or turned OFF, the audio selector will be placed in the fail-safe mode.

The power for the CD player (CD-15) is controlled by the audio panel. When the audio panel is on, it automatically activates the player. If it is necessary to disable the CD player, hold the two CD buttons (far right) in for more than 2 seconds.

This removes power from the CD-15 circuits. To re-enable the CD-15, cycle power on the SL15-CD audio panel.

The power switch also controls the audio selector panel functions, intercom, CD player and marker beacon receiver.

Page 3