Installing the Replacement Keyboard

Refer to the illustrations on the previous pages to complete these steps.

1Place the new keyboard upside down on the trackpad and palm rests.

2Carefully align the keyboard cable connector pins to the connector on the logic board. With the pins properly aligned, press down on the connector to connect the keyboard cable to the logic board.

Cable Loop

Connector Pins

3Replace the RAM shield and secure it with the two screws.

4Reinstall the AirPort Card, if used, into its connector, and secure it with the wire bracket. Ensure the antenna cable is tucked out of the way.

5Flip the keyboard right side up, and secure it with the two plastic tabs.

6Turn over the computer and reinstall the battery. Secure the battery door. Turn your computer upright and reconnect all cables.

7Restart your computer.

Warning: Never turn on your computer unless all of its internal and external parts are in place and it is closed. Operating the computer when it is open or missing parts can damage your computer or cause injury.

iBook Keyboard - 5

Page 5
Image 5
Apple 073-0581 warranty Installing the Replacement Keyboard